106682-9222 ZEXEL 9 400 611 843 BOSCH INJECTION-PUMP ASSEMBLY 9400611843 1066829222 6162732341

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106682-9222 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 843 9400611843

ZEXEL 106682-9222 1066829222

KOMATSU 6162732341 6162732341

Service parts 106682-9222 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106068-2681

3. GOVERNOR 105447-1601

4. SUPPLY PUMP 105237-4260

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105664-0390

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105111-4502

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 26.0{265}

13. NOZZLE-HOLDER 105041-7112

14. NOZZLE 105015-9340

15. NOZZLE SET

Include in #1:

106682-9222 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 843 9400611843

ZEXEL 106682-9222 1066829222

KOMATSU 6162732341 6162732341

Zexel num

Bosch num

Firm num

Name

106682-9222

9 400 611 843

6162732341 KOMATSU

INJECTION-PUMP ASSEMBLY
SA6D170 K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-4-1000

Overflow valve 131425-1620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 2.8 2.75 2.85

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 15.9

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 606 601 611

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 7.2+-0.5

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 36 31 41

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_03

Adjusting point D

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 520 520 540

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Stop lever at stopping (with the stop lever at full) (5)Idle sub spring setting: L1.
----------
K=14 L1=6.8-0.5mm
----------

Speed control lever angle

F:Full speed I:Idle S:Stop (1)Stopper bolt setting (2)Set the pump speed at aa (3)Set speed at bb (setting at delivery), set stopper bolt.
----------
aa=750r/min bb=900r/min
----------
a=58deg+-3deg b=14deg+-5deg c=36deg+-5deg d=6deg+-5deg