106682-4510 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066824510

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106682-4510 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106682-4510 1066824510

Service parts 106682-4510 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106068-2100

3. GOVERNOR 105447-0750

4. SUPPLY PUMP 105237-1750

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105664-0600

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5980

11. Nozzle and Holder 74W 3227 1A

12. Open Pre:MPa(Kqf/cm2) 31.4{320}

13. NOZZLE-HOLDER 105030-3260

14. NOZZLE 105015-7870

15. NOZZLE SET

Include in #1:

106682-4510 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106682-4510 1066824510

Zexel num

Bosch num

Firm num

Name

106682-4510

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131425-1620

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.5 3.45 3.55

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 14.4

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 345 340 350

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 8.8+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 30 27 33

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT: RAL (4)Idle sub spring setting: L1.
----------
K=20 RAL=16.4+0.2mm L1=7.5-0.5mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=900r/min bb=750r/min
----------
a=(9deg)+-5deg b=(42deg)+-5deg c=(12deg)+-5deg