106673-3230 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066733230 220205520a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106673-3230 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106673-3230 1066733230

HINO 220205520A 220205520a

Service parts 106673-3230 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-0561

3. GOVERNOR 105407-7270

4. SUPPLY PUMP 105207-1750

5. AUTOM. ADVANCE MECHANIS 105635-0460

6. COUPLING PLATE 105662-0850

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5572

11. Nozzle and Holder 23600-1860D

12. Open Pre:MPa(Kqf/cm2) 21.6{220}

13. NOZZLE-HOLDER 105031-5461

14. NOZZLE

105015-7020

15. NOZZLE SET

Include in #1:

106673-3230 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106673-3230 1066733230

HINO 220205520A 220205520a

Zexel num

Bosch num

Firm num

Name

106673-3230
106673-3231

220205520A HINO

INJECTION-PUMP ASSEMBLY
K13D-T * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-0920

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.3 3.2 3.3

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 8.8

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 152.5 149.5 155.5

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point C

Rack position 6.8+-0.5

Pump speed r/min 560 560 560

Average injection quantity mm3/st. 50 48 52

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_03

Adjusting point D

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 140 140 150

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 800--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 750

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 950

Advance angle deg. 1.5 1 2

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Idle spring not operating. (4)RACK LIMIT (5)Set idle sub-spring
----------
K=9
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=6deg+-5deg b=11deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Rack position aa or less, pump speed bb (2)Normal stop
----------
aa=6.3mm bb=0r/min
----------
a=27deg+-5deg b=53deg+-5deg