Fuel injectors
  1. Home
  2. injection
  3. #1066732690

106673-2690 ZEXEL 9 400 617 258 BOSCH INJECTION-PUMP ASSEMBLY 9400617258 1066732690 me157762


106673-2690 INJECTION-PUMP ASSEMBLY
Rating:
77
Buy INJECTION-PUMP ASSEMBLY 106673-2690 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 258 9400617258
ZEXEL 106673-2690 1066732690
MITSUBISHI ME157762 me157762

Service parts 106673-2690 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106061-5720
3. GOVERNOR 105407-5100
4. SUPPLY PUMP 105207-1210
5. AUTOM. ADVANCE MECHANIS 105636-1880
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5990
11. Nozzle and Holder ME050883
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-3970
14. NOZZLE 105015-6150
15. NOZZLE SET

Include in #1:

106673-2690 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 258 9400617258
ZEXEL 106673-2690 1066732690
MITSUBISHI ME157762 me157762


Zexel num
Bosch num
Firm num
Name
106673-2690 
9 400 617 258 
ME157762  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D22TC K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.4
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   155.5 152.5 158.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   5.7
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   8.5 3.3 13.7
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   140 130 150
Fixing the lever   *
Rack limit   *
Injection quantity adjustment_04
Adjusting point   E
Rack position   6.3+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   16 13.4 18.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   1000++
Advance angle deg.   0 0 0
Remarks
Do not advance until starting N = 1000.  
Timer adjustment_02
Pump speed r/min   1000
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   2 2 2
Remarks
Measure the actual speed, stop  

Test data Ex:

Governor adjustment

Test data 106673-2690
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Main spring setting (5)Set idle sub-spring
----------
K=7
----------

Speed control lever angle

Test data 106673-2690
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(26deg)+-5deg b=(5deg)+-5deg

Stop lever angle

Test data 106673-2690
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 106673-2690
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(7deg)




Have questions with 106673-2690?





Group cross 106673-2690 ZEXEL

Mitsubishi 

106673-2600  
9 400 617 249 
ME056906 
INJECTION-PUMP ASSEMBLY
6D22
106673-2610  
9 400 617 250 
ME1E6057G 
INJECTION-PUMP ASSEMBLY
6D22T
106673-2620  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106673-2621  
9 400 617 251 
ME157578 
INJECTION-PUMP ASSEMBLY
6D22TC
106673-2630  

106673-2631 
F 019 Z10 639 
 
INJECTION-PUMP ASSEMBLY
106673-2631  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106673-2632  
9 400 617 252 
ME157577 
INJECTION-PUMP ASSEMBLY
6D22T
106673-2640  
9 400 617 253 
ME056940 
INJECTION-PUMP ASSEMBLY
6D22T2
106673-2641  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106673-2650  
9 400 617 254 
ME056939 
INJECTION-PUMP ASSEMBLY
6D22T2
106673-2651  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106673-2660  

106673-2890 
9 400 617 255 
ME056945 
INJECTION-PUMP ASSEMBLY
6D22T2
106673-2670  
9 400 617 256 
ME150405 
INJECTION-PUMP ASSEMBLY
6D22T2
106673-2680  
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

106673-2681  
9 400 617 257 
ME157728 
INJECTION-PUMP ASSEMBLY
6D22T
106673-2690  
9 400 617 258 
ME157762 
INJECTION-PUMP ASSEMBLY
6D22TC
Back to top