Fuel injectors
  1. Home
  2. injection
  3. #1066732130

106673-2130 ZEXEL 9 400 617 213 BOSCH INJECTION-PUMP ASSEMBLY 9400617213 1066732130 me157069


106673-2130 INJECTION-PUMP ASSEMBLY
Rating:
23
Buy INJECTION-PUMP ASSEMBLY 106673-2130 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 213 9400617213
ZEXEL 106673-2130 1066732130
MITSUBISHI ME157069 me157069

Service parts 106673-2130 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-5140
3. GOVERNOR 105408-0530
4. SUPPLY PUMP 105207-1210
5. AUTOM. ADVANCE MECHANIS 105636-1820
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6211
11. Nozzle and Holder ME059621
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105030-5010
14. NOZZLE 105015-5330
15. NOZZLE SET

Include in #1:

106673-2130 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 213 9400617213
ZEXEL 106673-2130 1066732130
MITSUBISHI ME157069 me157069


Zexel num
Bosch num
Firm num
Name
106673-2130 
9 400 617 213 
ME157069  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D22T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.7
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   132 129 135
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   4.8+-0.5
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   8 5.4 10.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   13.9+-0. 5
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   133 113 153
Fixing the lever   *
Rack limit   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   6+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   10.8 8.2 13.4
Fixing the rack   *
Remarks
(check)  
Timer adjustment
Pump speed r/min   950--
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   900
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1100
Advance angle deg.   1 0.5 1.5
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 106673-2130
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Torque spring does not operate. (5)At delivery (6)Idle sub spring setting: L1.
----------
K=9 L1=6.2+-0.1mm
----------

Speed control lever angle

Test data 106673-2130
F:Full speed I:Idle (1)Stopper bolt setting (2)At shipping
----------

----------
a=30deg+-5deg b=(2deg) c=10deg+-5deg

Stop lever angle

Test data 106673-2130
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 106673-2130
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(7deg)




Have questions with 106673-2130?





Group cross 106673-2130 ZEXEL

Mitsubishi 

106673-2100  
9 400 617 210 
ME157068 
INJECTION-PUMP ASSEMBLY
6D22TC
106673-2110  
9 400 617 211 
ME157071 
INJECTION-PUMP ASSEMBLY
6D22T
106673-2120  
9 400 617 212 
ME157075 
INJECTION-PUMP ASSEMBLY
6D22TC
106673-2130  
9 400 617 213 
ME157069 
INJECTION-PUMP ASSEMBLY
6D22T
106673-2141  
9 400 617 214 
ME150103 
INJECTION-PUMP ASSEMBLY
6D22T3
106673-2150  
9 400 617 215 
ME056794 
INJECTION-PUMP ASSEMBLY
6D22T2
106673-2160  
9 400 617 216 
ME056831 
INJECTION-PUMP ASSEMBLY
6D22
106673-2170  

106673-2460 
9 400 617 217 
ME056832 
INJECTION-PUMP ASSEMBLY
6D22
106673-2180  
9 400 617 218 
ME056795 
INJECTION-PUMP ASSEMBLY
6D22T2
106673-2190  
9 400 617 219 
ME056796 
INJECTION-PUMP ASSEMBLY
6D22T2
Back to top