106672-3364 ZEXEL 9 400 617 084 BOSCH INJECTION-PUMP ASSEMBLY 9400617084 1066723364 220202795a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106672-3364 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 084 9400617084

ZEXEL 106672-3364 1066723364

HINO 220202795A 220202795a

Service parts 106672-3364 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106060-7421

3. GOVERNOR 105407-4441

4. SUPPLY PUMP 105217-1301

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105662-0850

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-5851

11. Nozzle and Holder 23600-2030A

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-5480

14. NOZZLE 105015-7690

15. NOZZLE SET

Include in #1:

106672-3364 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 084 9400617084

ZEXEL 106672-3364 1066723364

HINO 220202795A 220202795a

Zexel num

Bosch num

Firm num

Name

106672-3364

9 400 617 084

220202795A HINO

INJECTION-PUMP ASSEMBLY
EK130-T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-0920

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.3 3.2 3.3

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 9.6

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 175.3 173.3 177.3

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 9.1

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 167.8 161.8 173.8

Max. variation between cylinders % 0 -4 4

Fixing the rack *

Injection quantity adjustment_03

Adjusting point -

Rack position 5.4+-0.5

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 14.8 11.8 17.8

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Set idle sub-spring (3)Main spring setting (4)Rack difference between N = N1 and N = N2
----------
K=6 N1=750r/min N2=550r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Set the pump speed at bb. (3)Stopper bolt setting
----------
aa=900r/min bb=750r/min
----------
a=(5deg)+-5deg b=(19deg)+-5deg c=(5deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Contacts inner stopper. (2)Rack position = aa or less, at speed = bb (3)Contacts outer stopper.
----------
aa=4.4mm bb=0r/min
----------
a=27deg+-5deg b=53deg+-5deg c=(11deg)