106671-9260 ZEXEL 9 400 611 166 BOSCH INJECTION-PUMP ASSEMBLY 9400611166 1066719260


106671-9260 INJECTION-PUMP ASSEMBLY
Rating:
33
Buy INJECTION-PUMP ASSEMBLY 106671-9260 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 166 9400611166
ZEXEL 106671-9260 1066719260

Service parts 106671-9260 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0710
3. GOVERNOR 105487-6960
4. SUPPLY PUMP 105207-1520
5. AUTOM. ADVANCE MECHANIS 105681-1730
6. COUPLING PLATE 105663-0470
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-7961
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 15.7{160}/21.6{220}
13. NOZZLE-HOLDER 105030-4711
14. NOZZLE 105025-0660
15. NOZZLE SET

Include in #1:

106671-9260 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 166 9400611166
ZEXEL 106671-9260 1066719260


Zexel num
Bosch num
Firm num
Name
106671-9260 
9 400 611 166 
  DAEWOO
INJECTION-PUMP ASSEMBLY
DE12TI K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4420
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.2 4.15 4.25
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.9
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   166 164 168
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Boost pressure kPa   80 80
Boost pressure mmHg   600 600
Injection quantity adjustment_02
Adjusting point   B
Rack position   4.8+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   9 7.5 10.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   105 105
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   500 500 500
Rack position   7.9
Boost pressure kPa   13.3 11.3 15.3
Boost pressure mmHg   100 85 115
Boost compensator adjustment_02
Pump speed r/min   500 500 500
Rack position   10.4
Boost pressure kPa   66.7 66.7 66.7
Boost pressure mmHg   500 500 500
Timer adjustment
Pump speed r/min   750--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1100
Advance angle deg.   3 2.5 3.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106671-9260
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Microswitch adjustment unnecessary. (5)Boost compensator stroke: BCL (6)Damper spring setting (7)Rack difference between N = N1 and N = N2
----------
RT=1 TH=2.1mm BCL=2.5+-0.1mm N1=1050r/min N2=500r/min
----------

Speed control lever angle

Test data 106671-9260
F:Full speed
----------

----------
a=16.5deg+-5deg

0000000901

Test data 106671-9260
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=34deg+-3deg

Stop lever angle

Test data 106671-9260
N:Pump normal S:Stop the pump.
----------

----------
a=40deg+-5deg b=73deg+-5deg

Timing setting

Test data 106671-9260
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)




Have questions with 106671-9260?





Group cross 106671-9260 ZEXEL

Niigata-Urawa 

9 400 617 042 
43547180A 
INJECTION-PUMP ASSEMBLY
DMF13S

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
DE12T
9 400 611 335 
 
INJECTION-PUMP ASSEMBLY
DE12T
 
 
INJECTION-PUMP ASSEMBLY
6D22T
 
 
INJECTION-PUMP ASSEMBLY
6D22T
 
 
INJECTION-PUMP ASSEMBLY
6D22T
 
 
INJECTION-PUMP ASSEMBLY
H100
 
 
INJECTION-PUMP ASSEMBLY
H100
F 019 Z20 077 
 
INJECTION-PUMP ASSEMBLY
H100

Daewoo 

106671-9260  
9 400 611 166 
 
INJECTION-PUMP ASSEMBLY
DE12TI
 
 
INJECTION-PUMP ASSEMBLY
9 400 619 732 
 
INJECTION-PUMP ASSEMBLY
SA6D125

Komatsu 

9 400 612 626 
6152721520 
INJECTION-PUMP ASSEMBLY
SA6D125

Dpico 

F 019 Z20 078 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22
F 019 Z20 079 
 
INJECTION-PUMP ASSEMBLY
6D22
Back to top