106671-5870 ZEXEL 9 400 616 884 BOSCH INJECTION-PUMP ASSEMBLY 9400616884 1066715870 1671296512

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-5870 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 884 9400616884

ZEXEL 106671-5870 1066715870

NISSAN-DIESEL 1671296512 1671296512

Service parts 106671-5870 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-1830

3. GOVERNOR 105407-7160

4. SUPPLY PUMP 105237-4210

5. AUTOM. ADVANCE MECHANIS 105681-1660

6. COUPLING PLATE 105663-0650

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-7930

11. Nozzle and Holder 16600-96609

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/22.6{230}

13. NOZZLE-HOLDER 105030-4210

14. NOZZLE 105015-8770

15. NOZZLE SET

Include in #1:

106671-5870 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 884 9400616884

ZEXEL 106671-5870 1066715870

NISSAN-DIESEL 1671296512 1671296512

Zexel num

Bosch num

Firm num

Name

106671-5870

9 400 616 884

1671296512 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
PF6TA K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-0020

Overflow valve opening pressure kPa 157 157 157

Overflow valve opening pressure kgf/cm2 1.6 1.6 1.6

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.9 3.85 3.95

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 11.6

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 197.5 195.5 199.5

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point C

Rack position 6.2+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 11.5 10.5 12.5

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Injection quantity adjustment_03

Adjusting point D

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 185 185 205

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min -

Advance angle deg. 0 0 0

Remarks
Measure speed (beginning of operation).

Timer adjustment_02

Pump speed r/min -

Advance angle deg. 2 1.5 2.5

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring
----------
K=10
----------

Speed control lever angle

F:Full speed I:Idle (1)Set the pump speed at aa. ( At delivery ) (2)Stopper bolt setting (3)Stopper bolt setting (4)When pump speed set at bb
----------
aa=910r/min bb=750r/min
----------
a=5deg+-5deg b=25deg+-5deg c=7deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=A a2=- r1=750r/min r2=- Q1=197.5+-2mm3/st Q2=- c1=+-4% c2=- a3=18 a4=15 r3=900r/min r4=750r/min