106671-5890 ZEXEL 9 400 616 886 BOSCH INJECTION-PUMP ASSEMBLY 9400616886 1066715890 1671496513

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-5890 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 886 9400616886

ZEXEL 106671-5890 1066715890

NISSAN-DIESEL 1671496513 1671496513

Service parts 106671-5890 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-0451

3. GOVERNOR 105487-7530

4. SUPPLY PUMP 105217-1850

5. AUTOM. ADVANCE MECHANIS 105636-2110

6. COUPLING PLATE 105663-0640

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-6970

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 22.6(230)

13. NOZZLE-HOLDER 105030-4540

14. NOZZLE 105015-8860

15. NOZZLE SET

Include in #1:

106671-5890 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 886 9400616886

ZEXEL 106671-5890 1066715890

NISSAN-DIESEL 1671496513 1671496513

Zexel num

Bosch num

Firm num

Name

106671-5890

9 400 616 886

1671496513 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
PF6T K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 132424-0620

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.65 3.6 3.7

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 11.9

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 166.4 164.4 168.4

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Boost pressure kPa 30.7 30.7

Boost pressure mmHg 230 230

Injection quantity adjustment_02

Adjusting point C

Rack position 7.2+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 16.7 15.7 17.7

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_03

Adjusting point D

Rack position 9.8

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 101.6 95.6 107.6

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 300 300 300

Rack position 9.8

Boost pressure kPa 4 4

Boost pressure mmHg 30 30

Boost compensator adjustment_02

Pump speed r/min 300 300 300

Rack position 11.5

Boost pressure kPa 16 14.7 17.3

Boost pressure mmHg 120 110 130

Boost compensator adjustment_03

Pump speed r/min 300 300 300

Rack position 11.9

Boost pressure kPa 17.3 17.3 17.3

Boost pressure mmHg 130 130 130

Timer adjustment

Pump speed r/min 750--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 700

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1050

Advance angle deg. 1 0.5 1.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Perform governor adjustment at an ambient temperature of at least 15 deg C (boost compensator start spring is shape memory alloy). (3)Rack limit using stop lever (4)Damper spring setting (5)At speed = not less that aa and not more than bb, rack position = not exceeding (non-injection rack position - 0.5) (6)Variable speed specification: idling adjustment (7)Fix the lever at the full-load position at delivery. (8)Main spring setting
----------
aa=500r/min bb=1150r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Pump speed = aa (2)Set the stopper bolt (fixed at full-load position at delivery.)
----------
aa=290r/min
----------
a=21deg+-5deg b=12deg+-5deg