106671-4843 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066714843

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106671-4843 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106671-4843 1066714843

Service parts 106671-4843 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106061-7500

3. GOVERNOR 105489-4370

4. SUPPLY PUMP 105207-1470

5. AUTOM. ADVANCE MECHANIS 105636-2370

6. COUPLING PLATE 105663-0740

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2)

13. NOZZLE-HOLDER

14. NOZZLE

15. NOZZLE SET

Include in #1:

106671-4843 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106671-4843 1066714843

Zexel num

Bosch num

Firm num

Name

106671-4843
106671-4844

DPICO

INJECTION-PUMP ASSEMBLY
D2366T * Q

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-4420

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.7 4.65 4.75

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10.4

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 148 146 150

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Boost pressure kPa 56 56

Boost pressure mmHg 420 420

Injection quantity adjustment_02

Adjusting point B

Rack position 11

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 154.5 151.5 157.5

Max. variation between cylinders % 0 -3 3

Fixing the lever *

Boost pressure kPa 56 56

Boost pressure mmHg 420 420

Injection quantity adjustment_03

Adjusting point F

Rack position 5.2+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 14.5 13 16

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_04

Adjusting point G

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 165 160 170

Fixing the lever *

Boost pressure kPa 56 56

Boost pressure mmHg 420 420

Rack limit *

Boost compensator adjustment

Pump speed r/min 500 500 500

Rack position 8.7

Boost pressure kPa 22.7 20.7 24.7

Boost pressure mmHg 170 155 185

Boost compensator adjustment_02

Pump speed r/min 500 500 500

Rack position 10.4

Boost pressure kPa 42.7 42.7 42.7

Boost pressure mmHg 320 320 320

Timer adjustment

Pump speed r/min 900--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 850

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1100

Advance angle deg. 3 2.5 3.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Microswitch adjustment unnecessary. (3)RACK LIMIT (4)Boost compensator stroke: BCL (5)Damper spring setting
----------
BCL=1.7+-0.1mm
----------

Speed control lever angle

F:Full speed
----------

----------
a=7deg+-5deg

0000000901

F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=34deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=40deg+-5deg b=73deg+-5deg

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position for the No. 6 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(70deg)