106671-1931 ZEXEL 9 400 612 219 BOSCH INJECTION-PUMP ASSEMBLY 9400612219 1066711931 1156029200


106671-1931 INJECTION-PUMP ASSEMBLY
Rating:
69
Buy INJECTION-PUMP ASSEMBLY 106671-1931 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 219 9400612219
ZEXEL 106671-1931 1066711931
ISUZU 1156029200 1156029200

Service parts 106671-1931 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-0220
3. GOVERNOR 105407-5430
4. SUPPLY PUMP 105237-1331
5. AUTOM. ADVANCE MECHANIS 105636-2430
6. COUPLING PLATE 105663-0290
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6991
11. Nozzle and Holder 1-15300-159-1
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105030-4271
14. NOZZLE 105015-6660
15. NOZZLE SET

Include in #1:

106671-1931 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 219 9400612219
ZEXEL 106671-1931 1066711931
ISUZU 1156029200 1156029200


Zexel num
Bosch num
Firm num
Name
106671-1931 
9 400 612 219 
1156029200  ISUZU
INJECTION-PUMP ASSEMBLY
6RB1-T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   134424-1920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.8 3.77 3.83
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.75 60.25
Difference between angles 2
Cyl.1-2
deg.   120 119.75 120.25
Difference between angles 3
Cal 1-6
deg.   180 179.75 180.25
Difference between angles 4
Cal 1-3
deg.   240 239.75 240.25
Difference between angles 5
Cal 1-5
deg.   300 299.75 300.25
Injection quantity adjustment
Adjusting point   A
Rack position   9
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   131 129 133
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7+-0.5
Pump speed r/min   325 325 325
Average injection quantity mm3/st.   13.2 10 16.4
Max. variation between cylinders %   0 -13 13
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   213 213
Fixing the lever   *
Timer adjustment
Pump speed r/min   750--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1000
Advance angle deg.   1 0.5 1.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106671-1931
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Rack difference between N = N1 and N = N2
----------
K=16 N1=1000r/min N2=700r/min
----------

Speed control lever angle

Test data 106671-1931
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=3deg+-5deg b=21deg+-5deg

Stop lever angle

Test data 106671-1931
N:Pump normal S:Stop the pump.
----------

----------
a=10deg+-5deg b=53deg+-5deg

Timing setting

Test data 106671-1931
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=16deg
----------
a=(70deg)




Have questions with 106671-1931?





Group cross 106671-1931 ZEXEL

Isuzu 

9 400 616 734 
1156028990 
INJECTION-PUMP ASSEMBLY
6SD1-MTC
9 400 616 735 
1156029420 
INJECTION-PUMP ASSEMBLY
6SD1-MTC
 
1156028600 
INJECTION-PUMP ASSEMBLY
6WA1-TCN
 
1156028601 
INJECTION-PUMP ASSEMBLY
6WA1-TCN
 
1156028602 
INJECTION-PUMP ASSEMBLY
6WA1-TCN
 
1156028603 
INJECTION-PUMP ASSEMBLY
6WA1-TCN
9 400 610 837 
1156028605 
INJECTION-PUMP ASSEMBLY
6WA1-TCN
9 400 616 736 
1156028606 
INJECTION-PUMP ASSEMBLY
6WA1-TCN
F 019 Z10 242 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

106671-1931  
9 400 612 219 
1156029200 
INJECTION-PUMP ASSEMBLY
6RB1-T
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

 
1156029490 
INJECTION-PUMP ASSEMBLY
6RB1-TC
9 400 616 737 
1156029491 
INJECTION-PUMP ASSEMBLY
6RB1-TC
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

 
1156029500 
INJECTION-PUMP ASSEMBLY
6RB1-TC
9 400 616 738 
1156029501 
INJECTION-PUMP ASSEMBLY
6RB1-TC
 
1156029730 
INJECTION-PUMP ASSEMBLY
6RB1-MTC
9 400 616 739 
1156030230 
INJECTION-PUMP ASSEMBLY
6RB1-T
 
1156029450 
INJECTION-PUMP ASSEMBLY
6SD1-TC
Back to top