104746-1041 ZEXEL 9 460 611 024 BOSCH INJECTION-PUMP ASSEMBLY 9460611024 1047461041 8970802023

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104746-1041 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 611 024 9460611024

ZEXEL 104746-1041 1047461041

ISUZU 8970802023 8970802023

Components :

0.	INJECTION-PUMP ASSEMBLY	104746-1041
1.	_
2.	FUEL INJECTION PUMP	104646-1041
3.	NUMBER PLATE	146923-5400
4.	_
5.	CAPSULE	146620-0120
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105158-2292
8.	Nozzle and Holder	8-97081-789-1
9.	Open Pre:MPa(Kqf/cm2)	14.7{150}
10.	NOZZLE-HOLDER	105088-1120
11.	NOZZLE	105007-1280

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0320	DRIVE SHAFT
12/1.	[1]	146200-0300	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-4021	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-2120	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146300-4200	PUMP PLUNGER
32.	[1]	146301-0300	SLIDING PIECE
33.	[1]	146603-3600	SHIM
34.	[1]	146306-0500	COMPRESSION SPRING
34B.	[1]	146306-0400	COMPRESSION SPRING
34C.	[1]	146306-1500	COMPRESSION SPRING
34D.	[1]	146306-0800	COMPRESSION SPRING
35/1.	[0]	146690-4400	SHIM D18&12T0.3
35/1.	[0]	146690-4500	SHIM D18&12T0.6
35/1.	[0]	146690-4600	SHIM D18&12T0.9
35/1.	[0]	146690-4700	SHIM D18&12T1.2
35/1.	[0]	146690-4800	SHIM D18&12T1.5
35/1.	[0]	146690-4900	SHIM D18&12T1.8
35/1.	[0]	146690-5000	SHIM D18&12T2.1
35/1.	[0]	146690-5400	SHIM D18&12T0.7
35/1.	[0]	146690-5500	SHIM D18&12T0.8
35/1.	[0]	146690-5600	SHIM D18&12T1.0
35/1.	[0]	146690-5700	SHIM D18&12T1.1
36.	[1]	146600-0800	O-RING
37.	[1]	146310-4620	COVER
38.	[2]	010006-4570	BLEEDER SCREW
39.	[1]	146310-0100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[2]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[2]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[2]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[2]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[2]	146690-1400	SHIM D17&5.2T0.9
48/1.	[2]	146690-1500	SHIM D17&5.2T1.1
48/1.	[2]	146690-1600	SHIM D17&5.2T1.3
48/1.	[2]	146690-1700	SHIM D17&5.2T1.4
48/1.	[2]	146690-1800	SHIM D17&5.2T1.6
49.	[2]	146234-0020	GUIDE PIN
50.	[1]	146403-4720	HYDRAULIC HEAD
50.	[1]	146403-4720	HYDRAULIC HEAD
50.	[1]	146403-4720	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
54.	[4]	146433-0100	GASKET
55.	[4]	146430-0320	DELIVERY-VALVE ASSEMBLY VE4
56.	[4]	146432-0000	COMPRESSION SPRING
58.	[4]	146440-0120	FITTING
60.	[3]	139106-0100	FLAT-HEAD SCREW
67.	[1]	146704-0720	COMPENSATOR,MANIFOLD-PRES
67/1.	[1]	146805-3620	GOVERNOR COVER
67/2.	[1]	146515-3720	CONTROL SHAFT
67/3.	[1]	146600-0100	O-RING
67/4.	[1]	139310-0200	PLAIN WASHER
67/5.	[1]	146830-4200	CONTROL LEVER STAMP 042
67/5B.	[1]	146830-4300	CONTROL LEVER STAMP 043
67/6.	[1]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
67/7.	[1]	013020-6040	UNION NUT
67/13.	[1]	146621-1700	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-3000	BLEEDER SCREW
67/16.	[1]	146526-3000	BLEEDER SCREW
67/18.	[1]	146592-5900	COILED SPRING
67/19.	[1]	146541-3000	BUSHING
67/21.	[1]	146592-5800	COILED SPRING
67/22.	[1]	146541-3100	SLOTTED WASHER
67/31.	[1]	146710-1100	BUSHING
67/33.	[1]	139218-0400	UNION NUT
67/34.	[1]	146712-1600	BEARING PIN
67/35.	[1]	146621-0300	UNION NUT
67/36.	[1]	146600-1400	O-RING
67/37.	[1]	146710-0100	BUSHING
67/38.	[1]	139506-0200	GASKET
67/39.	[1]	146620-0300	CAPSULE
67/40.	[1]	026512-1540	GASKET
67/41.	[1]	146713-4000	ADJUSTING PIN
67/42.	[2]	146714-0000	PLATE
67/43.	[1]	146715-0600	DIAPHRAGM
67/44.	[1]	139306-0100	LOCKING WASHER
67/45.	[1]	013030-6040	UNION NUT
67/46.	[1]	146716-0500	SLIDER
67/47.	[1]	146717-3500	COILED SPRING
67/48/1.	[1]	146720-0400	SPACER BUSHING L4.5
67/48/1.	[1]	146720-0500	SPACER BUSHING L4.7
67/48/1.	[1]	146720-0600	SPACER BUSHING L4.9
67/48/1.	[1]	146720-0700	SPACER BUSHING L5.1
67/48/1.	[1]	146720-0800	SPACER BUSHING L5.3
67/48/1.	[1]	146720-2300	SPACER BUSHING L4.6
67/48/1.	[1]	146720-2400	SPACER BUSHING L4.8
67/48/1.	[1]	146720-2500	SPACER BUSHING L5.0
67/48/1.	[1]	146720-2600	SPACER BUSHING L5.2
67/48/1.	[1]	146720-2700	SPACER BUSHING L5.4
67/48/1.	[1]	146720-2800	SPACER BUSHING L5.5
67/48/1.	[1]	146720-2900	SPACER BUSHING L5.6
67/48/1.	[1]	146725-2500	SPACER BUSHING L5.7
67/49.	[1]	146721-3120	COVER
67/54.	[4]	139006-4500	BLEEDER SCREW
67/56.	[1]	146723-0300	CONTROL LEVER
67/57.	[1]	146712-0100	BEARING PIN
67/58.	[2]	146620-0600	CAPSULE
67/59.	[2]	026506-1040	GASKET
67/60.	[1]	146724-0300	ELEMENT
67/61.	[1]	146724-0600	CAPSULE
67/78.	[1]	146600-4400	SEAL RING
67/100.	[1]	146931-1300	BRACKET
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-3400	THREADED PIN L53.00
67/201B.	[1]	146545-3500	THREADED PIN L55.00
67/201C.	[1]	146545-3600	THREADED PIN L57.00
67/202.	[1]	139208-0900	UNION NUT
67/203.	[1]	146600-1200	O-RING
95.	[1]	146861-1820	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1.0
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0420	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146575-4600	SLIDING SLEEVE STAMP46
116.	[1]	146576-0200	CAP
117/1.	[1]	146577-2600	PLUG L3.70
117/1.	[1]	146577-2700	PLUG L3.90
117/1.	[1]	146577-2800	PLUG L4.10
117/1.	[1]	146577-2900	PLUG L4.30
117/1.	[1]	146577-3000	PLUG L4.50
117/1.	[1]	146577-3100	PLUG L4.70
117/1.	[1]	146577-3200	PLUG L4.90
117/1.	[1]	146577-3300	PLUG L5.10
117/1.	[1]	146577-7400	PLUG L3.6
117/1.	[1]	146577-7500	PLUG L3.8
117/1.	[1]	146577-7600	PLUG L4.0
117/1.	[1]	146577-7700	PLUG L4.2
117/1.	[1]	146577-7800	PLUG L4.4
117/1.	[1]	146577-7900	PLUG L4.6
117/1.	[1]	146577-8000	PLUG L4.8
117/1.	[1]	146577-8100	PLUG L5.0
117/1.	[1]	146877-0000	PLUG L5.2
120.	[1]	146579-0820	RETAINING PIN
122.	[1]	146580-0900	GOVERNOR SPRING
123.	[4]	146620-0500	HEX-SOCKET-HEAD CAP SCREW
130.	[1]	146421-0020	CAPSULE
130/2.	[1]	026508-1140	GASKET D11.4&8.2T1.0
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0520	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-1520	OVER FLOW VALVE
137.	[2]	139512-0500	GASKET
138.	[1]	146666-0920	INLET UNION
162.	[1]	139006-4400	BLEEDER SCREW
200.	[1]	146206-0100	COILED SPRING
205.	[1]	029470-4030	WOODRUFF KEY
221.	[1]	146930-7121	BRACKET
224.	[3]	139006-4400	BLEEDER SCREW
224.	[3]	139006-4400	BLEEDER SCREW
225.	[1]	146930-7200	BRACKET
231.	[1]	010206-2240	HEX-SOCKET-HEAD CAP SCREW
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-7320	WIRE
243.	[1]	146621-1000	UNION NUT
245.	[3]	139512-0500	GASKET
246.	[1]	146125-0000	EYE BOLT
247.	[1]	146666-3520	INLET UNION
248.	[1]	146614-0200	SPACER BUSHING
249.	[1]	139006-4400	BLEEDER SCREW
280.	[1]	146361-1321	START ADVANCE ASSY
281.	[1]	146600-0800	O-RING
282.	[2]	010206-1240	HEX-SOCKET-HEAD CAP SCREW
286.	[1]	014010-6140	PLAIN WASHER D13&6.5T1.0
287.	[1]	020106-3040	BLEEDER SCREW
307.	[1]	146310-2301	CAP
457.	[1]	146931-4800	BRACKET
800S.	[1]	146018-1320	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-0320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
812S.	[1]	146600-1920	PARTS SET
821S.	[1]	146210-5720	ROLLER SET
835S.	[1]	146598-1000	CAP
836S/1.	[1]	146598-0600	CAP L18
836S/1.	[1]	146598-0700	CAP L21
836S/1.	[1]	146598-0800	CAP L24
836S/1.	[1]	146598-0900	CAP L27
903.	[1]	146620-0120	CAPSULE
903/2.	[1]	146600-1300	O-RING
905.	[1]	146679-2420	ADJUSTING DEVICE
906.	[1]	146923-5400	NAMEPLATE
912.	[2]	139006-5700	BLEEDER SCREW

Include in #2:

104746-1041 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 611 024 9460611024

ZEXEL 104746-1041 1047461041

ISUZU 8970802023 8970802023

Zexel num

Bosch num

Firm num

Name

104746-1041

9 460 611 024

8970802023 ISUZU

INJECTION-PUMP ASSEMBLY
4JG2 * K 11CJ VE4 VE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 60.9 60.4 61.4

Difference in delivery mm3/st. 3.5

Basic *

Injection timing adjustment_02

Pump speed r/min 2100 2100 2100

Average injection quantity mm3/st. 19.6 16.1 23.1

Injection timing adjustment_03

Pump speed r/min 1800 1800 1800

Average injection quantity mm3/st. 59.2 54.2 64.2

Injection timing adjustment_04

Pump speed r/min 1440 1440 1440

Average injection quantity mm3/st. 58.9 54.4 63.4

Injection timing adjustment_05

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 60.9 59.9 61.9

Injection timing adjustment_06

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 60 55 65

Injection quantity adjustment

Pump speed r/min 2100 2100 2100

Average injection quantity mm3/st. 19.6 16.6 22.6

Difference in delivery mm3/st. 5.5

Basic *

Injection quantity adjustment_02

Pump speed r/min 2300 2300 2300

Average injection quantity mm3/st. 5

Governor adjustment

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 13.2 11.2 15.2

Difference in delivery mm3/st. 2

Basic *

Governor adjustment_02

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 5

Governor adjustment_03

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 13.2 10.7 15.7

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 100 80 120

Basic *

Remarks
Full

Speed control lever angle

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 0 0 0

Remarks
Magnet OFF

0000000901

Pump speed r/min 1000 1000 1000

Overflow quantity cm3/min 678 528 828

Stop lever angle

Pump speed r/min 1000 1000 1000

Pressure kPa 422 393 451

Pressure kgf/cm2 4.3 4 4.6

Basic *

Stop lever angle_02

Pump speed r/min 1000 1000 1000

Pressure kPa 422 393 451

Pressure kgf/cm2 4.3 4 4.6

Stop lever angle_03

Pump speed r/min 1700 1700 1700

Pressure kPa 657 608 706

Pressure kgf/cm2 6.7 6.2 7.2

0000001101

Pump speed r/min 1700 1700 1700

Timer stroke mm 5.8 5.5 6.1

Basic *

_02

Pump speed r/min 800 800 800

Timer stroke mm 1.65 1.1 2.2

_03

Pump speed r/min 1000 1000 1000

Timer stroke mm 2.5 2.2 2.8

_04

Pump speed r/min 1440 1440 1440

Timer stroke mm 3.85 3.5 4.2

_05

Pump speed r/min 1600 1600 1600

Timer stroke mm 4.85 4.3 5.4

_06

Pump speed r/min 1700 1700 1700

Timer stroke mm 5.8 5.4 6.2

_07

Pump speed r/min 1800 1800 1800

Timer stroke mm 6.75 6 7.5

_08

Pump speed r/min 1950 1950 1950

Timer stroke mm 7.8 7.4 8.2

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 31.8 31.3 32.3

Timer stroke variation dT mm 0.3 0.1 0.5

Basic *

_02

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 31.8 30.8 32.8

Timer stroke variation dT mm 0.3 0 0.6

_03

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 16.7 15.2 18.2

Timer stroke variation dT mm 1 0.5 1.5

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 0.5 0.4 0.6

BCS stroke mm 3 2.9 3.1

Pre-stroke mm 0.1 0.08 0.12

Control lever angle alpha deg. 18 14 22

Control lever angle beta deg. 31 26 36

Test data Ex:

0000001801 W-CSD ADJUSTMENT

Adjustment of the W-CSD 1. Adjustment of the advance angle of the timer (1)Determine the timer advance angle using the graph. (2)(1) Adjust with the screw (A) so that the timer advance angle determined in the item (1) is obtained. Y:Timer stroke TA X:Temperature t (C): timer stroke TA(mm)
----------

----------
TA:TA=-0.0345t+2.59

0000001901 V-FICD ADJUSTMENT

Adjustment of the V-FICD 1. Insert a shim L1 between the control lever (A) and the idle adjusting screw (B) and adjust using the FICD adjusting screw (C) so that the actuator moves through its full stroke. Then, fix using nut (D). If adjustment with the FICD adjusting screw (C) is not possible, adjust by moving the actuator stroke with (E) and (F). 2. Apply P1{P2} pressure to the actuator and confirm that the actuator moves through its full stroke. After release, confirm that the gap between control lever (A) and FICD adjusting screw (C) is at least L2. (G): exceeds L2 when releasing actuator (H): actuator stroke L3
----------
L1=1.40+-0.1mm L2=0.5mm L3=5mm P1=-53.3kPa P2=-400mmHg
----------
T=3.4~4.9N-m(0.35~0.50kgf-m) L1=1.40+-0.1mm