Rating:
Information injection-pump assembly
BOSCH
9 460 613 917
9460613917
ZEXEL
104745-0125
1047450125
MAZDA
W90313800D
w90313800d
Components :
0. | INJECTION-PUMP ASSEMBLY | 104745-0125 |
1. | _ | |
2. | FUEL INJECTION PUMP | 104645-0122 |
3. | NUMBER PLATE | 146996-5600 |
4. | _ | |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | 146679-4120 |
7. | NOZZLE AND HOLDER ASSY | 105148-1183 |
8. | Nozzle and Holder | PN40 13 H50C |
9. | Open Pre:MPa(Kqf/cm2) | 10.8{110} |
10. | NOZZLE-HOLDER | 105078-0111 |
11. | NOZZLE | 105007-1210 |
Scheme ###:
1/6. | [1] | 146601-0700 | PACKING RING |
6. | [1] | 146100-0720 | SUPPLY PUMP |
9. | [1] | 146103-0100 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0420 | DRIVE SHAFT |
12/1. | [1] | 146200-0400 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-5320 | ROLLER SET |
24. | [1] | 146303-0100 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-4720 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146311-8520 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
34. | [1] | 146312-4900 | COMPRESSION SPRING |
34B. | [1] | 146312-4700 | COMPRESSION SPRING |
34C. | [1] | 146312-5100 | COMPRESSION SPRING |
35/1. | [1] | 146690-3200 | SHIM D11.5&9.4T0.1 |
35/1. | [1] | 146690-3300 | SHIM D11.5&9.4T0.2 |
35/1. | [1] | 146690-3400 | SHIM D11.5&9.4T0.25 |
35/1. | [1] | 146690-3500 | SHIM D11.5&9.4T1.0 |
35/1. | [1] | 146690-4100 | SHIM D11.5&9.4T2 |
35/1. | [1] | 146690-4200 | SHIM D11.5&9.4T0.5 |
35/1. | [1] | 146690-4300 | SHIM D11.5&9.4T0.75 |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-4020 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
41. | [1] | 146312-3300 | COMPRESSION SPRING |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM D17.0&5.2T0.50 |
48/1. | [1] | 146603-0100 | SHIM D17.0&5.2T0.80 |
48/1. | [1] | 146603-0200 | SHIM D17.0&5.2T1.00 |
48/1. | [1] | 146603-0300 | SHIM D17.0&5.2T1.20 |
48/1. | [1] | 146603-0400 | SHIM D17.0&5.2T1.50 |
48/1. | [1] | 146603-0500 | SHIM D17.0&5.2T1.80 |
48/1. | [1] | 146603-0600 | SHIM D17.0&5.2T2.00 |
48/1. | [1] | 146690-1400 | SHIM D17&5.2T0.9 |
48/1. | [1] | 146690-1500 | SHIM D17&5.2T1.1 |
48/1. | [1] | 146690-1600 | SHIM D17&5.2T1.3 |
48/1. | [1] | 146690-1700 | SHIM D17&5.2T1.4 |
48/1. | [1] | 146690-1800 | SHIM D17&5.2T1.6 |
48/1. | [1] | 146690-1900 | SHIM D17&5.2T1.7 |
48/1. | [1] | 146690-5800 | SHIM D17&5.2T2.1 |
48/1. | [1] | 146690-5900 | SHIM D17&5.2T2.2 |
48/1. | [1] | 146690-6000 | SHIM D17&5.2T2.3 |
48/1. | [1] | 146690-6100 | SHIM D17&5.2T2.4 |
48/1. | [1] | 146690-6200 | SHIM D17&5.2T2.5 |
48/1. | [1] | 146690-6300 | SHIM D17&5.2T2.6 |
48/1. | [1] | 146690-6400 | SHIM D17&5.2T2.7 |
48/1. | [1] | 146690-6500 | SHIM D17&5.2T2.8 |
48/1. | [1] | 146690-6600 | SHIM D17&5.2T2.9 |
48/1. | [1] | 146690-6700 | SHIM D17&5.2T3.0 |
48/1. | [1] | 146690-6800 | SHIM D17&5.2T3.1 |
48/1. | [1] | 146690-6900 | SHIM D17&5.2T3.2 |
48/1. | [1] | 146690-7000 | SHIM D17&5.2T3.3 |
48/1. | [1] | 146690-7100 | SHIM D17&5.2T3.4 |
48/1. | [1] | 146690-7200 | SHIM D17&5.2T0.4 |
48/1. | [1] | 146690-7300 | SHIM D17&5.2T0.6 |
48/1. | [1] | 146690-7400 | SHIM D17&5.2T0.7 |
48/1. | [1] | 146690-7500 | SHIM D17&5.2T1.9 |
48/1. | [1] | 146690-7800 | SHIM D17&5.2T0.2 |
49. | [2] | 146234-0600 | GUIDE PIN |
50. | [1] | 146403-6820 | HYDRAULIC HEAD |
50. | [1] | 146403-6820 | HYDRAULIC HEAD |
50. | [1] | 146403-6820 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM D9.5&3.0T1.90 |
52/1. | [1] | 146420-0100 | SHIM D9.5&3.0T1.92 |
52/1. | [1] | 146420-0200 | SHIM D9.5&3.0T1.94 |
52/1. | [1] | 146420-0300 | SHIM D9.5&3.0T1.96 |
52/1. | [1] | 146420-0400 | SHIM D9.5&3.0T1.98 |
52/1. | [1] | 146420-0500 | SHIM D9.5&3.0T2.00 |
52/1. | [1] | 146420-0600 | SHIM D9.5&3.0T2.02 |
52/1. | [1] | 146420-0700 | SHIM D9.5&3.0T2.04 |
52/1. | [1] | 146420-0800 | SHIM D9.5&3.0T2.06 |
52/1. | [1] | 146420-0900 | SHIM D9.5&3.0T2.08 |
52/1. | [1] | 146420-1000 | SHIM D9.5&3.0T2.10 |
52/1. | [1] | 146420-1100 | SHIM D9.5&3.0T2.12 |
52/1. | [1] | 146420-1200 | SHIM D9.5&3.0T2.14 |
52/1. | [1] | 146420-1300 | SHIM D9.5&3.0T2.16 |
52/1. | [1] | 146420-1400 | SHIM D9.5&3.0T2.18 |
52/1. | [1] | 146420-1500 | SHIM D9.5&3.0T2.20 |
52/1. | [1] | 146420-1600 | SHIM D9.5&3.0T2.22 |
52/1. | [1] | 146420-1700 | SHIM D9.5&3.0T2.24 |
52/1. | [1] | 146420-1800 | SHIM D9.5&3.0T2.26 |
52/1. | [1] | 146420-1900 | SHIM D9.5&3.0T2.28 |
52/1. | [1] | 146420-2000 | SHIM D9.5&3.0T2.30 |
52/1. | [1] | 146420-2100 | SHIM D9.5&3.0T2.32 |
52/1. | [1] | 146420-2200 | SHIM D9.5&3.0T2.34 |
52/1. | [1] | 146420-2300 | SHIM D9.5&3.0T2.36 |
52/1. | [1] | 146420-2400 | SHIM D9.5&3.0T2.38 |
52/1. | [1] | 146420-2500 | SHIM D9.5&3.0T2.40 |
52/1. | [1] | 146420-2600 | SHIM D9.5&3.0T2.42 |
52/1. | [1] | 146420-2700 | SHIM D9.5&3.0T2.44 |
52/1. | [1] | 146420-2800 | SHIM D9.5&3.0T2.46 |
52/1. | [1] | 146420-2900 | SHIM D9.5&3.0T2.48 |
52/1. | [1] | 146420-3000 | SHIM D9.5&3.0T2.50 |
52/1. | [1] | 146420-3100 | SHIM D9.5&3.0T2.52 |
52/1. | [1] | 146420-3200 | SHIM D9.5&3.0T2.54 |
52/1. | [1] | 146420-3300 | SHIM D9.5&3.0T2.56 |
52/1. | [1] | 146420-3400 | SHIM D9.5&3.0T2.58 |
52/1. | [1] | 146420-3500 | SHIM D9.5&3.0T2.60 |
52/1. | [1] | 146420-3600 | SHIM D9.5&3.0T2.62 |
52/1. | [1] | 146420-3700 | SHIM D9.5&3.0T2.64 |
52/1. | [1] | 146420-3800 | SHIM D9.5&3.0T2.66 |
52/1. | [1] | 146420-3900 | SHIM D9.5&3.0T2.68 |
52/1. | [1] | 146420-4000 | SHIM D9.5&3.0T2.70 |
52/1. | [1] | 146420-4100 | SHIM D9.5&3.0T2.72 |
52/1. | [1] | 146420-4200 | SHIM D9.5&3.0T2.74 |
52/1. | [1] | 146420-4300 | SHIM D9.5&3.0T2.76 |
52/1. | [1] | 146420-4400 | SHIM D9.5&3.0T2.78 |
52/1. | [1] | 146420-4500 | SHIM D9.5&3.0T2.80 |
52/1. | [1] | 146420-4600 | SHIM D9.5&3.0T2.82 |
52/1. | [1] | 146420-4700 | SHIM D9.5&3.0T2.84 |
52/1. | [1] | 146420-4800 | SHIM D9.5&3.0T2.86 |
52/1. | [1] | 146420-4900 | SHIM D9.5&3.0T2.88 |
52/1. | [1] | 146420-5000 | SHIM D9.5&3.0T2.90 |
52/1. | [1] | 146420-5100 | SHIM D9.5&3.0T1.74 |
52/1. | [1] | 146420-5200 | SHIM D9.5&3.0T1.76 |
52/1. | [1] | 146420-5300 | SHIM D9.5&3.0T1.78 |
52/1. | [1] | 146420-5400 | SHIM D9.5&3.0T1.80 |
52/1. | [1] | 146420-5500 | SHIM D9.5&3.0T1.82 |
52/1. | [1] | 146420-5600 | SHIM D9.5&3.0T1.84 |
52/1. | [1] | 146420-5700 | SHIM D9.5&3.0T1.86 |
52/1. | [1] | 146420-5800 | SHIM D9.5&3.0T1.88 |
54. | [4] | 146433-0100 | GASKET D12&6.4T1.00 |
55. | [4] | 146430-7320 | DELIVERY-VALVE ASSEMBLY |
56. | [4] | 146432-0000 | COMPRESSION SPRING |
58. | [4] | 146440-0220 | FITTING |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146504-4020 | GOVERNOR COVER |
67/1. | [1] | 146806-6720 | GOVERNOR COVER |
67/14. | [1] | 146621-1700 | UNION NUT |
67/16. | [1] | 146526-2800 | BLEEDER SCREW |
67/23. | [1] | 146934-3100 | BRACKET |
67/24. | [2] | 010206-2240 | HEX-SOCKET-HEAD CAP SCREW |
67/64. | [1] | 146935-7200 | BRACKET |
67/68. | [1] | 010206-1040 | HEX-SOCKET-HEAD CAP SCREW |
67/69. | [1] | 139006-4600 | BLEEDER SCREW |
67/78. | [1] | 146600-4400 | SEAL RING |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-4100 | THREADED PIN |
67/201B. | [1] | 146545-4200 | THREADED PIN |
67/201C. | [1] | 146545-4300 | THREADED PIN |
67/202. | [1] | 139208-0900 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146810-9820 | CONTROL SHAFT |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146832-4820 | CONTROL LEVER |
72B. | [1] | 146832-4920 | CONTROL LEVER |
72C. | [1] | 146832-6120 | CONTROL LEVER |
72D. | [1] | 146832-6220 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT M6P1H5 |
95. | [1] | 146865-9220 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0420 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM D20.2&8.3T1.05 |
110/1. | [1] | 146571-0100 | SHIM D20.2&8.3T1.25 |
110/1. | [1] | 146571-0200 | SHIM D20.2&8.3T1.45 |
110/1. | [1] | 146571-0300 | SHIM D20.2&8.3T1.65 |
110/1. | [1] | 146571-0400 | SHIM D20.2&8.3T1.85 |
110/1. | [1] | 146571-0500 | SHIM D20.2&8.3T1.15 |
110/1. | [1] | 146571-0600 | SHIM D20.2&8.3T1.35 |
110/1. | [1] | 146571-0700 | SHIM D20.2&8.3T1.55 |
110/1. | [1] | 146571-0800 | SHIM D20.2&8.3T1.75 |
111. | [1] | 146602-0600 | PLAIN WASHER D20&8.4T1.40 |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER D17&6.4T1.60 |
115. | [1] | 146976-0000 | SLIDING SLEEVE |
116. | [1] | 146576-0200 | CAP |
117/1. | [1] | 146577-1800 | PLUG L2.10 |
117/1. | [1] | 146577-1900 | PLUG L2.30 |
117/1. | [1] | 146577-2000 | PLUG L2.50 |
117/1. | [1] | 146577-2100 | PLUG L2.70 |
117/1. | [1] | 146577-2200 | PLUG L2.90 |
117/1. | [1] | 146577-2300 | PLUG L3.10 |
117/1. | [1] | 146577-2400 | PLUG L3.30 |
117/1. | [1] | 146577-2500 | PLUG L3.50 |
117/1. | [1] | 146577-2600 | PLUG L3.70 |
117/1. | [1] | 146577-2700 | PLUG L3.90 |
117/1. | [1] | 146577-2800 | PLUG L4.10 |
117/1. | [1] | 146577-2900 | PLUG L4.30 |
117/1. | [1] | 146577-3000 | PLUG L4.50 |
117/1. | [1] | 146577-3100 | PLUG L4.70 |
117/1. | [1] | 146577-3200 | PLUG L4.90 |
117/1. | [1] | 146577-3300 | PLUG L5.10 |
117/1. | [1] | 146577-6700 | PLUG L2.2 |
117/1. | [1] | 146577-6800 | PLUG L2.4 |
117/1. | [1] | 146577-6900 | PLUG L2.6 |
117/1. | [1] | 146577-7000 | PLUG L2.8 |
117/1. | [1] | 146577-7100 | PLUG L3.0 |
117/1. | [1] | 146577-7200 | PLUG L3.2 |
117/1. | [1] | 146577-7300 | PLUG L3.4 |
117/1. | [1] | 146577-7400 | PLUG L3.6 |
117/1. | [1] | 146577-7500 | PLUG L3.8 |
117/1. | [1] | 146577-7600 | PLUG L4.0 |
117/1. | [1] | 146577-7700 | PLUG L4.2 |
117/1. | [1] | 146577-7800 | PLUG L4.4 |
117/1. | [1] | 146577-7900 | PLUG L4.6 |
117/1. | [1] | 146577-8000 | PLUG L4.8 |
117/1. | [1] | 146577-8100 | PLUG L5.0 |
117/1. | [1] | 146877-0000 | PLUG L5.2 |
117/1. | [1] | 146877-0100 | PLUG L5.3 |
117/1. | [1] | 146877-0200 | PLUG L5.4 |
117/1. | [1] | 146877-0300 | PLUG L5.5 |
117/1. | [1] | 146877-4700 | PLUG |
117/1. | [1] | 146877-4800 | PLUG |
117/1. | [1] | 146877-4900 | PLUG |
117/1. | [1] | 146877-5000 | PLUG |
123. | [3] | 139106-0200 | FLAT-HEAD SCREW |
124. | [1] | 146620-0500 | HEX-SOCKET-HEAD CAP SCREW |
130. | [1] | 146421-0020 | CAPSULE |
130/2. | [1] | 026508-1140 | GASKET D11.4&8.2T1 |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-3420 | CONTROL VALVE |
135/5. | [1] | 149065-0100 | FILLER PIECE |
136. | [1] | 146650-6020 | PULLING ELECTROMAGNET |
137. | [2] | 139514-0200 | GASKET |
137. | [2] | 139514-0200 | GASKET |
145. | [1] | 146621-4901 | UNION NUT |
147. | [1] | 146600-5000 | O-RING |
162. | [1] | 146625-8020 | PLATE |
200. | [1] | 146206-0100 | COILED SPRING |
205. | [1] | 146201-0100 | WOODRUFF KEY |
214. | [1] | 146542-7500 | BUSHING |
217. | [1] | 146542-2600 | SLOTTED WASHER |
218. | [1] | 146592-8400 | COILED SPRING |
219. | [1] | 146541-3000 | BUSHING |
220. | [1] | 146592-8500 | COILED SPRING |
221. | [1] | 146935-7820 | BRACKET |
222. | [1] | 010206-1440 | HEX-SOCKET-HEAD CAP SCREW M6P1L14 |
223. | [1] | 146670-9620 | SWITCH |
235. | [1] | 146932-8000 | BRACKET |
236. | [3] | 139006-4800 | BLEEDER SCREW |
236. | [3] | 139006-4800 | BLEEDER SCREW |
237. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
240. | [1] | 146650-4320 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
243. | [1] | 146621-4901 | UNION NUT |
244. | [1] | 010206-1040 | HEX-SOCKET-HEAD CAP SCREW |
245. | [3] | 139512-0500 | GASKET |
246. | [1] | 146125-0700 | EYE BOLT |
247. | [1] | 146677-2620 | INLET UNION |
247. | [1] | 146677-2620 | INLET UNION |
248. | [1] | 146614-0200 | SPACER BUSHING |
251. | [1] | 146125-0101 | FILTER |
252. | [1] | 146125-0200 | COILED SPRING |
275. | [1] | 146612-8000 | BRACKET |
276. | [2] | 010010-1640 | BLEEDER SCREW M10P1.5L16 4T |
309. | [1] | 139006-6600 | BLEEDER SCREW |
310. | [1] | 146685-6021 | POTENTCIOMETER |
310/1. | [1] | 146685-6011 | POTENTCIOMETER |
310/2. | [2] | 139104-0400 | FLAT-HEAD SCREW |
310/3. | [1] | 146648-6700 | JOINT CONNECTION |
310/3B. | [1] | 146648-6800 | JOINT CONNECTION |
310/3C. | [1] | 146648-6900 | JOINT CONNECTION |
310/3D. | [1] | 146648-7000 | JOINT CONNECTION |
310/3E. | [1] | 146648-7100 | JOINT CONNECTION |
310/3F. | [1] | 146648-7200 | JOINT CONNECTION |
310/3G. | [1] | 146648-7300 | JOINT CONNECTION |
310/3H. | [1] | 146648-7400 | JOINT CONNECTION |
310/3I. | [1] | 146648-7500 | JOINT CONNECTION |
310/3J. | [1] | 146648-7600 | JOINT CONNECTION |
310/3K. | [1] | 146648-7700 | JOINT CONNECTION |
310/3L. | [1] | 146648-7800 | JOINT CONNECTION |
310/4. | [1] | 146661-0601 | BOOT |
311. | [1] | 139006-4600 | BLEEDER SCREW |
312. | [1] | 146935-7300 | PLATE |
313. | [1] | 139006-4400 | BLEEDER SCREW |
314. | [1] | 146849-4820 | CONTROL LEVER |
314B. | [1] | 146849-4520 | CONTROL LEVER |
314C. | [1] | 146849-4620 | CONTROL LEVER |
315. | [1] | 139206-0800 | UNION NUT |
317. | [2] | 010206-1040 | HEX-SOCKET-HEAD CAP SCREW |
318. | [1] | 146935-8220 | BRACKET |
370. | [1] | 146663-2720 | SPACER RING |
455. | [1] | 146849-3220 | RACK |
504/1. | [1] | 146649-4500 | RESISTER |
504/1. | [1] | 146649-4600 | RESISTER |
504/1. | [1] | 146649-4700 | RESISTER |
504/1. | [1] | 146649-4800 | RESISTER |
504/1. | [1] | 146649-4900 | RESISTER |
504/1. | [1] | 146649-5000 | RESISTER |
504/1. | [1] | 146649-5100 | RESISTER |
504/1. | [1] | 146649-5200 | RESISTER |
504/1. | [1] | 146649-5300 | RESISTER |
504/1. | [1] | 146649-5400 | RESISTER |
504/1. | [1] | 146649-5500 | RESISTER |
504/1. | [1] | 146649-5600 | RESISTER |
504/1. | [1] | 146649-5700 | RESISTER |
800S. | [1] | 146018-8420 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
804S. | [1] | 146232-1520 | COMPRESSION SPRING |
805S. | [1] | 146574-0720 | PARTS SET |
810S. | [1] | 146600-2420 | REPAIR SET |
812S. | [1] | 146600-1920 | PARTS SET |
821S. | [1] | 146210-5820 | ROLLER SET |
835S. | [1] | 146598-1000 | CAP |
836S/1. | [1] | 146598-0600 | CAP L18 |
836S/1. | [1] | 146598-0700 | CAP L21 |
836S/1. | [1] | 146598-0800 | CAP L24 |
836S/1. | [1] | 146598-0900 | CAP L27 |
905. | [1] | 146679-4120 | ACTUATOR |
906. | [1] | 146996-5600 | NAMEPLATE |
912. | [2] | 010206-1440 | HEX-SOCKET-HEAD CAP SCREW M6P1L14 |
Include in #2:
104745-0125
as INJECTION-PUMP ASSEMBLY
Cross reference number
BOSCH
9 460 613 917
9460613917
ZEXEL
104745-0125
1047450125
MAZDA
W90313800D
w90313800d
Zexel num
Bosch num
Firm num
Name
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113orSAEJ967d
1404 Test oil ISO4113orSAEJ967d
Test oil temperature
degC
45
45
50
Nozzle
105780-0060
Bosch type code
NP-DN0SD1510
Nozzle holder
105780-2150
Opening pressure
MPa
13
13
13.3
Opening pressure
kgf/cm2
133
133
136
Injection pipe
157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450
Inside diameter - outside diameter - length (mm) mm 2-6-450
Joint assembly
157641-4720
Tube assembly
157641-4020
Transfer pump pressure
kPa
20
20
20
Transfer pump pressure
kgf/cm2
0.2
0.2
0.2
Direction of rotation (viewed from drive side)
Left L
Left L
(Solenoid timer adjustment condition)
With S/T O-ring; S/T ON. ON
With S/T O-ring; S/T ON. ON
Injection timing adjustment
Pump speed
r/min
1500
1500
1500
Average injection quantity
mm3/st.
56.7
56.2
57.2
Difference in delivery
mm3/st.
4.5
Basic
*
Oil temperature
degC
50
48
52
Injection timing adjustment_02
Pump speed
r/min
500
500
500
Average injection quantity
mm3/st.
51.4
47.9
54.9
Oil temperature
degC
48
46
50
Injection timing adjustment_03
Pump speed
r/min
1500
1500
1500
Average injection quantity
mm3/st.
56.7
55.7
57.7
Difference in delivery
mm3/st.
5
Basic
*
Oil temperature
degC
50
48
52
Injection timing adjustment_04
Pump speed
r/min
2000
2000
2000
Average injection quantity
mm3/st.
54.7
51.2
58.2
Oil temperature
degC
50
48
52
Injection quantity adjustment
Pump speed
r/min
2450
2450
2450
Average injection quantity
mm3/st.
22.9
19.9
25.9
Difference in delivery
mm3/st.
4.5
Basic
*
Oil temperature
degC
55
52
58
Injection quantity adjustment_02
Pump speed
r/min
2700
2700
2700
Average injection quantity
mm3/st.
8
Oil temperature
degC
55
52
58
Injection quantity adjustment_03
Pump speed
r/min
2450
2450
2450
Average injection quantity
mm3/st.
22.9
12.9
32.9
Difference in delivery
mm3/st.
5
Basic
*
Oil temperature
degC
55
52
58
Governor adjustment
Pump speed
r/min
360
360
360
Average injection quantity
mm3/st.
10.8
9.8
11.8
Difference in delivery
mm3/st.
1.7
Basic
*
Oil temperature
degC
48
46
50
Governor adjustment_02
Pump speed
r/min
360
360
360
Average injection quantity
mm3/st.
10.8
9.3
12.3
Difference in delivery
mm3/st.
2.2
Basic
*
Oil temperature
degC
48
46
50
Boost compensator adjustment
Pump speed
r/min
400
400
400
Average injection quantity
mm3/st.
17
15
19
Oil temperature
degC
48
46
50
Lever angle (shim thickness)
mm
2.5
2.5
2.5
Timer adjustment
Pump speed
r/min
150
150
150
Average injection quantity
mm3/st.
70
55
90
Basic
*
Oil temperature
degC
48
46
50
Remarks
Full
Full
Timer adjustment_02
Pump speed
r/min
150
150
150
Average injection quantity
mm3/st.
70
50
90
Oil temperature
degC
48
46
50
Remarks
Full
Full
Speed control lever angle
Pump speed
r/min
360
360
360
Average injection quantity
mm3/st.
0
0
0
Oil temperature
degC
48
46
50
Remarks
Magnet OFF at idling position
Magnet OFF at idling position
0000000901
Pump speed
r/min
1500
1500
1500
Overflow quantity with S/T OFF
cm3/min
460
330
590
Oil temperature
degC
50
48
52
Stop lever angle
Pump speed
r/min
1500
1500
1500
Pressure with S/T ON
kPa
618
579
657
Pressure with S/T ON
kgf/cm2
6.3
5.9
6.7
Pressure with S/T OFF
kPa
530
501
559
Pressure with S/T OFF
kgf/cm2
5.4
5.1
5.7
Basic
*
Oil temperature
degC
50
48
52
Remarks
OFF
OFF
Stop lever angle_02
Pump speed
r/min
1500
1500
1500
Pressure with S/T OFF
kPa
530
491
569
Pressure with S/T OFF
kgf/cm2
5.4
5
5.8
Basic
*
Oil temperature
degC
50
48
52
Remarks
OFF
OFF
0000001101
Pump speed
r/min
1500
1500
1500
Timer stroke with S/T ON
mm
7.4
7
7.8
Timer stroke with S/T OFF
mm
5.4
5.2
5.6
Basic
*
Oil temperature
degC
50
48
52
Remarks
OFF
OFF
_02
Pump speed
r/min
500
500
500
Timer stroke with S/T ON
mm
0.9
0
1.9
Oil temperature
degC
48
46
50
_03
Pump speed
r/min
1500
1500
1500
Timer stroke with S/T ON
mm
7.4
6.8
8
Timer stroke with S/T OFF
mm
5.4
5
5.8
Basic
*
Oil temperature
degC
50
48
52
Remarks
OFF
OFF
_04
Pump speed
r/min
1750
1750
1750
Timer stroke with S/T ON
mm
8.9
7.9
9.9
Timer stroke with S/T OFF
mm
7
6.2
7.8
Oil temperature
degC
50
48
52
_05
Pump speed
r/min
2100
2100
2100
Timer stroke with S/T ON
mm
9.8
8.8
10.6
Oil temperature
degC
50
48
52
0000001201
Max. applied voltage
V
8
8
8
Test voltage
V
13
12
14
0000001401
Pump speed
r/min
1500
1500
1500
Average injection quantity
mm3/st.
45.2
44.7
45.7
Timer stroke TA
mm
4.9
4.9
4.9
Timer stroke variation dT
mm
0.5
0.3
0.7
Basic
*
Oil temperature
degC
50
48
52
Remarks
OFF
OFF
_02
Pump speed
r/min
1500
1500
1500
Average injection quantity
mm3/st.
45.2
44.2
46.2
Timer stroke TA
mm
4.9
4.9
4.9
Timer stroke variation dT
mm
0.5
0.1
0.9
Basic
*
Oil temperature
degC
50
48
52
Remarks
OFF
OFF
_03
Pump speed
r/min
1500
1500
1500
Average injection quantity
mm3/st.
35
33.5
36.5
Timer stroke TA
mm
4.1
4.1
4.1
Timer stroke variation dT
mm
1.3
0.7
1.9
Oil temperature
degC
50
48
52
Timing setting
K dimension
mm
3.3
3.2
3.4
KF dimension
mm
6.01
5.91
6.11
MS dimension
mm
0.9
0.8
1
Pre-stroke
mm
0.03
0.01
0.05
Control lever angle alpha
deg.
12.5
8.5
16.5
Control lever angle beta
deg.
40
37
43
Test data Ex:
0000001801 CONTROL STANDARD AT IDLING
Standards for idle difference in delivery control
After idle adjustment, measure the idle injection quantities of (A) to (D).
Install the colored rings to the delivery valve holders (A) to (D) in accordance with the table.
(A): A cylinder (B) :B cylinder (C) : C cylinder (D): D cylinder
(E): Collar ring
(F): (A) >= (C)
(G): (C) > (A)
(H): (A) - (C) or (C) - (A)
(I): 0.2, 0.1(mm3/st)
(J): (B) - (D) or (D) - (B)
(K): Ring color
(L): At least 0.6 mm3/st
(M): 0.3, 0.4, 0.5 (mm3/st)
(N): 0.2, 0.1, 0.0 (mm3/st)
(O): (B) >= (D)
(P): (D) > (B)
(T): Yellow
(U): White
(V): Red
----------
----------
----------
----------
0000001901 POTENTIOMETER ADJUSTMENT
Adjustment of the potentiometer
Vi = input applied voltage
(1)Potentiometer setting:
(A): Adjusting point
(B): Checking point
(C): Control lever opening
(V): P/N output voltage
(2)Dummy bolt setting:
At pump speed N1, fix the control lever using the dummy bolt so that the injection quantity = Q1 in the table below.
(N): Speed of the pump
(Q): Injection quantity
(D): Targeted lever angle
C1:Full speed position
C2:Idling position
(3)Read the output voltage (V) of the potentiometer in the state indicated in (2) above. Then, select the compensation resistor from the following table and replace.
(R): Compensation resistance
Note
As the output voltage is compensated in the control unit after replacing the compensation resistor, confirmation is not necessary.
E = after installing compensation resistor, apply white paint as shown in the figure.
----------
N1=1,000r/min Q1=25.8+-1.0cm3/1000st
----------
Vi=10V V1=8.40+-0.03V V2=1.73+-0.70V N1=1,000r/min Q1=25.8+-1.0cm3/1000st D1=13.6deg V3=3.22~3.33V V4=3.34~3.45V V5=3.46~3.57V V6=3.58~3.69V V7=3.70~3.81V V8=3.82~3.93V V9=3.94~4.05V V10=4.06~4.17V V11=4.18~4.29V V12=4.30~4.41V V13=4.42~4.53V V14=4.54~4.65V V15=4.66~4.77V R1=No.1,0.18kohm R2=No.2,0.3kohm R3=No.3,0.43kohm R4=No.4,0.62kohm R5=No.5,0.82kohm R6=No.6,1.1kohm R7=No.7,1.5kohm R8=No.8,2kohm R9=No.9,2.7kohm R10=No.10,3.9kohm R11=No.11,5.6kohm R12=No.12,8.2kohm R13=No.13,15kohm
----------
N1=1,000r/min Q1=25.8+-1.0cm3/1000st
----------
Vi=10V V1=8.40+-0.03V V2=1.73+-0.70V N1=1,000r/min Q1=25.8+-1.0cm3/1000st D1=13.6deg V3=3.22~3.33V V4=3.34~3.45V V5=3.46~3.57V V6=3.58~3.69V V7=3.70~3.81V V8=3.82~3.93V V9=3.94~4.05V V10=4.06~4.17V V11=4.18~4.29V V12=4.30~4.41V V13=4.42~4.53V V14=4.54~4.65V V15=4.66~4.77V R1=No.1,0.18kohm R2=No.2,0.3kohm R3=No.3,0.43kohm R4=No.4,0.62kohm R5=No.5,0.82kohm R6=No.6,1.1kohm R7=No.7,1.5kohm R8=No.8,2kohm R9=No.9,2.7kohm R10=No.10,3.9kohm R11=No.11,5.6kohm R12=No.12,8.2kohm R13=No.13,15kohm
0000002001 WIRE
Confirmation of the wire length:
Accelerator wire: Idle-full stroke: L1
Adjustment of the double stage actuator:
(1)Apply negative pressure P1 {P2} to the actuator through the negative pressure inlet port (A).
(2)In status (1) above, adjust screw (C) so that the control lever (B)'s position is a [ie, the gap between the control lever and the idle switch (E) is L2]. Fix using the nut (D). Torque (D) to T1.
(3)Idle switch (E)'s locknut tightening torque is T2.
b:Alpha
----------
L1=34.1+3.5-5.5mm L2=5.1+-0.5mm a=9deg b=12.5+-4deg P1=-66.6kPa P2=-500mmHg T1=6~9Nm(0.6~0.9kgfm) T2=12~15Nm(1.2~1.5kgfm)
----------
a=9deg b=12.5+-4deg L2=5.1+-0.5mm SW=SW17 T2=12~15Nm(1.2~1.5kgfm)
----------
L1=34.1+3.5-5.5mm L2=5.1+-0.5mm a=9deg b=12.5+-4deg P1=-66.6kPa P2=-500mmHg T1=6~9Nm(0.6~0.9kgfm) T2=12~15Nm(1.2~1.5kgfm)
----------
a=9deg b=12.5+-4deg L2=5.1+-0.5mm SW=SW17 T2=12~15Nm(1.2~1.5kgfm)
0000002101 A/T PLATE ADJUSTMENT
(1)A/T link lever initial position setting
With the control lever at position a, adjust the length of connecting rod (C) so that the pin D1 can pass through the A/T link lever (A) and the bracket (B) at A. Then fix.
Tightening torque T1
(2)A/T wire stroke adjustment (at control lever idle to full positions)
Attach the A/T wire stroke measuring device to bracket (B) at position Y and confirm that the stroke is L1.
If the stroke is not as specified, replace the A/T link lever (A) and reconfirm the stroke.
----------
a=0deg D1=Dia.5.8-0.2mm T1=2.5~2.9N-m(0.25~0.31kgf-m) L1=30+-3mm
----------
b=(12.5deg)
----------
a=0deg D1=Dia.5.8-0.2mm T1=2.5~2.9N-m(0.25~0.31kgf-m) L1=30+-3mm
----------
b=(12.5deg)