Buy 104741-7330 ZEXEL 9 460 614 966 BOSCH INJECTION-PUMP ASSEMBLY 9460614966 1047417330 6205711380


104741-7330 INJECTION-PUMP ASSEMBLY
Rating:
60
Buy INJECTION-PUMP ASSEMBLY 104741-7330 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 614 966 9460614966
ZEXEL 104741-7330 1047417330
KOMATSU 6205711380 6205711380

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$922.91

21 Jun 2024
0.0837[0.04] Pounds
CN: WSZQP
Fuel pump module, Diesel Fuel Injection Pump 104641-7330 6205-71-1380 NP-VE4/11F1100RNP2515 Compatible For Cummins,Car fuel pump WSZQP
ZHQPING 🚗 “WSZQP”First of all, before buying our car parts, car fuel pump please make sure to check the model number of the car as well as the model number of the fuel pump as well as the appearance, because this is the most important point to buy car parts! (The title and description will have a description of the model number!) || 🚗 This car fuel pump can be a good replacement for your broken fuel pump, the durability will be stronger, we will do a good test of the car fuel pump before shipping to improve the efficiency of your use! || 🚗 This auto fuel pump is able to be installed easily, our customer service will assist you in the installation, saving your time cost! || 🚗 This automotive fuel pump has been rigorously tested by us to achieve savings in automotive fuel consumption, improve automotive fuel efficiency, and allow your vehicle to run better! || 🚗 Please remember our store name is “WSZQP”, we can provide customers with pre-sales consultation, after-sales installation consultation services to improve your buying experience.
$1,378.02
 

25 Jan 2024
0.1102[0.05] pounds
CN: DiManGongSi STORE
Diesel Fuel Injection Pump 104741-7330 NP-VE4/11F1100RNP2515 6205-71-1380 Compatible With KOMATSU 4D95L
TUMALO Fuel injection pump is one of the key components in engine fuel supply system. || The main function of the fuel injection pump is to transfer fuel from the fuel tank to the injector of the engine. || Fuel injection pumps usually consist of a plunger, drive gear, pressure regulator and control valve. || The fuel injection pump has a high pressure operation and can provide enough fuel pressure to ensure that the fuel injector works properly. || The operation of the fuel injection pump is controlled by instructions from the engine control unit (ECU) or other control systems.
$1,231.11
 

30 Dec 2023
0.1102[0.05] pounds
CN: meiyuanlei
Diesel Fuel Injection Pump 104741-7330 NP-VE4/11F1100RNP2515 6205-71-1380,Compatible For KOMATSU 4D95L
AKkis ♥ Diesel Fuel Injection Pump 104741-7330 NP-VE4/11F1100RNP2515 6205-71-1380,Compatible For KOMATSU 4D95L || ♥ Adaptability: Fuel pumps are widely adaptable and can adapt to different types of engines and fuel systems to meet the needs of various vehicles and provide better performance and driving experience. || ♥ High-pressure drive: The fuel pump can provide sufficient fuel pressure to ensure that the fuel can be delivered smoothly to all parts of the engine, keep it in normal working condition, and improve the operating efficiency and power output of the engine. || ♥ Safety: The fuel pump is equipped with a variety of safety devices and protection mechanisms, such as over-pressure protection, over-current protection, etc., to ensure that the fuel supply is cut off in time under abnormal conditions and to protect the safety of vehicles and passengers. || ♥ Durability: Using high-quality materials and strict manufacturing processes, it has a long service life, can withstand harsh environmental and working conditions, reduce the frequency of failure and maintenance, improve the reliability of the vehicle, and reduce maintenance costs.

Components :

0. INJECTION-PUMP ASSEMBLY 104741-7330
1. _
2. FUEL INJECTION PUMP 104641-7330
3. NUMBER PLATE 146984-3200
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105119-4070
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2) 19.6(200)
10. NOZZLE-HOLDER 105048-4450
11. NOZZLE 105017-3450

Scheme ###:

1/6. [1] 146601-1100 PACKING RING
6. [1] 146100-0120 SUPPLY PUMP
9. [1] 146103-0000 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0820 DRIVE SHAFT
12/1. [1] 146200-0800 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-8820 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0301 SLOTTED WASHER
29. [1] 146220-2620 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146300-0100 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
33. [1] 146603-0700 SHIM D17.5&7.5T0.60
34. [1] 146302-1900 COMPRESSION SPRING K=2.25KG/MM
35/1. [0] 146603-0700 SHIM D17.5&7.5T0.60
35/1. [0] 146603-0800 SHIM D17.5&7.5T0.70
35/1. [0] 146603-0900 SHIM D17.5&7.5T0.90
35/1. [0] 146603-1000 SHIM D17.5&7.5T1.00
35/1. [0] 146603-1100 SHIM D17.5&7.5T1.20
35/1. [0] 146603-3600 SHIM D17.5&7.5T2.40
36. [1] 146600-0800 O-RING
37. [1] 146310-0700 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-5100 COVER
40. [2] 146620-5000 BLEEDER SCREW
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM D17&5.2T2.1
48/1. [1] 146690-5900 SHIM D17&5.2T2.2
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM D17&5.2T2.7
48/1. [1] 146690-6500 SHIM D17&5.2T2.8
48/1. [1] 146690-6600 SHIM D17&5.2T2.9
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM D17&5.2T3.4
48/1. [1] 146690-7200 SHIM D17&5.2T0.4
48/1. [1] 146690-7300 SHIM D17&5.2T0.6
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM D17&5.2T1.9
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0600 GUIDE PIN
50. [1] 146402-3420 HYDRAULIC HEAD
50. [1] 146402-3420 HYDRAULIC HEAD
50. [1] 146402-3420 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET D12&6.4T1.00
55. [4] 146430-6020 DELIVERY-VALVE ASSEMBLY
56. [4] 146432-0200 COMPRESSION SPRING
58. [4] 146440-0220 FITTING
60. [4] 139106-0100 FLAT-HEAD SCREW
67. [1] 146821-9720 GOVERNOR COVER
67/1. [1] 146508-1022 GOVERNOR COVER
67/2. [1] 146515-0220 CONTROL SHAFT
67/3. [1] 146600-0100 O-RING
67/4. [2] 139310-0200 PLAIN WASHER
67/4. [2] 139310-0200 PLAIN WASHER
67/5. [1] 146530-0000 CONTROL LEVER
67/5B. [1] 146530-0100 CONTROL LEVER
67/5C. [1] 146832-1500 CONTROL LEVER
67/5D. [1] 146832-1600 CONTROL LEVER
67/6. [2] 014110-6440 LOCKING WASHER
67/6. [2] 014110-6440 LOCKING WASHER
67/7. [1] 013020-6040 UNION NUT M6P1H5
67/8. [1] 146515-1820 LEVER SHAFT
67/9. [1] 146587-4600 COILED SPRING
67/10. [1] 146600-0200 O-RING
67/11. [1] 146602-0100 PLAIN WASHER D14&10.1T1.50
67/12. [1] 146540-1300 CONTROL LEVER
67/12B. [1] 146540-1400 CONTROL LEVER MARK:0
67/12C. [1] 146540-5200 CONTROL LEVER
67/12D. [1] 146540-5300 CONTROL LEVER
67/13. [1] 146621-1700 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/15. [1] 146526-2800 BLEEDER SCREW
67/16. [1] 146526-2800 BLEEDER SCREW
67/18. [1] 146587-2000 COILED SPRING
67/19. [1] 146541-0000 ANGLE PIECE
67/25. [2] 013020-6040 UNION NUT M6P1H5
67/25. [2] 013020-6040 UNION NUT M6P1H5
67/26. [1] 139006-4800 BLEEDER SCREW
67/78. [1] 146600-4400 SEAL RING
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-4600 THREADED PIN L=24MM
67/201B. [1] 146545-4700 THREADED PIN L=26MM
67/201C. [1] 146545-4800 THREADED PIN L=28MM
67/201D. [1] 146545-5000 THREADED PIN
67/202. [1] 146598-5000 UNION NUT
67/203. [1] 146600-1200 O-RING
67/204. [1] 146545-4500 DAMPER
95. [1] 146871-4720 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0520 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER D20&8.4T1.40
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-2600 PLAIN WASHER D34&13T1.0
115. [1] 146976-2400 SLIDING SLEEVE
116. [1] 146576-0400 CAP
117/1. [1] 146877-0820 PLUG L=5.0
117/1. [1] 146877-0920 PLUG L=5.1
117/1. [1] 146877-1020 PLUG
117/1. [1] 146877-1120 PLUG
117/1. [1] 146877-1220 PLUG
117/1. [1] 146877-1320 PLUG
117/1. [1] 146877-1420 PLUG
117/1. [1] 146877-1520 PLUG
117/1. [1] 146877-1620 PLUG
117/1. [1] 146877-1720 PLUG
117/1. [1] 146877-1820 PLUG
117/1. [1] 146877-1920 PLUG
117/1. [1] 146877-2020 PLUG
117/1. [1] 146877-2120 PLUG
117/1. [1] 146877-2220 PLUG
117/1. [1] 146877-2320 PLUG
117/1. [1] 146877-2420 PLUG
117/1. [1] 146877-2520 PLUG
117/1. [1] 146877-2620 PLUG
117/1. [1] 146877-2720 PLUG
117/1. [1] 146877-2820 PLUG
117/1. [1] 146877-2920 PLUG
117/1. [1] 146877-3020 PLUG
117/1. [1] 146877-3120 PLUG
117/1. [1] 146877-3220 PLUG
117/1. [1] 146877-3320 PLUG
117/1. [1] 146877-3420 PLUG
117/1. [1] 146877-3520 PLUG
117/1. [1] 146877-3620 PLUG
117/1. [1] 146877-3720 PLUG
117/1. [1] 146877-3820 PLUG
117/1. [1] 146877-3920 PLUG
117/1. [1] 146877-4020 PLUG
117/1. [1] 146877-4120 PLUG
117/1. [1] 146877-4220 PLUG
120. [1] 146879-3920 RETAINING PIN
122. [1] 146580-2800 GOVERNOR SPRING
123. [4] 139106-0200 FLAT-HEAD SCREW
130. [1] 146421-1720 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1
130/3. [1] 146422-1001 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-0120 OVER FLOW VALVE
137. [2] 139512-0500 GASKET
205. [1] 029470-4030 WOODRUFF KEY
240. [1] 146650-1320 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 146662-0120 WIRE
243. [1] 146621-1000 UNION NUT
245. [3] 139512-0500 GASKET
246. [1] 146125-0020 EYE BOLT
248. [1] 146614-0200 SPACER BUSHING
343. [1] 146598-8320 CAP
800S. [1] 146018-9720 PUMP HOUSING
800S/1/6. [1] 146601-1100 PACKING RING
804S. [1] 146232-1520 COMPRESSION SPRING
805S. [1] 146574-0320 PARTS SET
810S. [1] 146600-1120 REPAIR SET
821S. [1] 146210-5720 ROLLER SET
825S. [1] 146598-8120 CAP
835S. [1] 146598-7320 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
837S. [1] 146598-7310 CAP
906. [1] 146984-2600 NAMEPLATE
940. [1] 146598-7520 CAP

Include in #2:

104741-7330 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 614 966 9460614966
ZEXEL 104741-7330 1047417330
KOMATSU 6205711380 6205711380


Zexel num
Bosch num
Firm num
Name
104741-7330 
9 460 614 966 
6205711380  KOMATSU
INJECTION-PUMP ASSEMBLY
S4D95L K 11CJ INJECTION PUMP ASSY VE4 VE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   88.6 88.1 89.1
Difference in delivery mm3/st.   7
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   58.1 54.1 62.1
Oil temperature degC   48 46 50
Injection timing adjustment_03
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   86.1 82.1 90.1
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   88.6 87.6 89.6
Difference in delivery mm3/st.   7.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   88.4 84.4 92.4
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   1225 1225 1225
Average injection quantity mm3/st.   58 54 62
Difference in delivery mm3/st.   7
Basic   *
Oil temperature degC   50 48 52
Injection quantity adjustment_02
Pump speed r/min   1350 1350 1350
Average injection quantity mm3/st.   6
Oil temperature degC   50 48 52
Injection quantity adjustment_03
Pump speed r/min   1225 1225 1225
Average injection quantity mm3/st.   58 53.5 62.5
Basic   *
Oil temperature degC   50 48 52
Governor adjustment
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   9 7 11
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   9 6.5 11.5
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   93.2 88.2 98.2
Basic   *
Oil temperature degC   48 46 50
Remarks
IDLE
 
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   93.2 88.2 98.2
Oil temperature degC   48 46 50
Remarks
IDLE
 
Speed control lever angle
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position
 
0000000901
Pump speed r/min   1100 1100 1100
Overflow quantity cm3/min   400 270 530
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1100 1100 1100
Pressure kPa   441 421 461
Pressure kgf/cm2   4.5 4.3 4.7
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
Stop lever angle_02
Pump speed r/min   1100 1100 1100
Pressure kPa   441 412 470
Pressure kgf/cm2   4.5 4.2 4.8
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
0000001101
Pump speed r/min   1100 1100 1100
Timer stroke mm   1 0.8 1.2
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
_02
Pump speed r/min   1100 1100 1100
Timer stroke mm   1 0.7 1.3
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
_03
Pump speed r/min   1200 1200 1200
Timer stroke mm   1.8 0.3 3.3
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   16 16 16
Test voltage V   25 24 26
0000001401
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   26.8 25.8 27.8
Timer stroke TA mm   1.3 1 1.6
Timer stroke variation dT mm   1.3 1.3 1.3
Basic   *
Oil temperature degC   50 48 52
Remarks
Reverse operation
 
_02
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   26.8 25.3 28.3
Timer stroke TA mm   1.3 0.9 1.7
Timer stroke variation dT mm   1.3 1.3 1.3
Basic   *
Oil temperature degC   50 48 52
Remarks
Reverse operation
 
_03
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   21.5 19.5 23.5
Timer stroke TA mm   2 2
Timer stroke variation dT mm   2 2
Oil temperature degC   50 48 52
Remarks
Reverse operation
 
Timing setting
K dimension mm   3.1 3 3.2
KF dimension mm   5.5 5.4 5.6
MS dimension mm   1.7 1.6 1.8
Pre-stroke mm   0.45 0.43 0.47
Control lever angle alpha deg.   16 12 20
Control lever angle beta deg.   32 27 37

Test data Ex:

0000001801 STOP LEVER ADJUSTMENT

Test data 104741-7330
Adjustment of the stop lever (1)Adjust the starting injection quantity adjusting bolt (B) so that the starting injection quantity is as specified. (2)Fix using the lock nut. (A) = starting injection quantity adjusting nut (C) = starting injection quantity adjusting lever (D) = adjusting position L:
----------

----------
L=7~13mm T=6~9N-m{0.6~0.9kgf-m}




Have questions with 104741-7330?





Group cross 104741-7330 ZEXEL

Komatsu 

9 460 614 236 
6204711330 
INJECTION-PUMP ASSEMBLY
4D95L
9 460 614 907 
6204711340 
INJECTION-PUMP ASSEMBLY
4D95L
9 460 614 831 
6205711370 
INJECTION-PUMP ASSEMBLY
S4D95L
104741-7330  
9 460 614 966 
6205711380 
INJECTION-PUMP ASSEMBLY
S4D95L
9 460 614 832 
6205711390 
INJECTION-PUMP ASSEMBLY
S4D95L
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 460 614 833 
6204711360 
INJECTION-PUMP ASSEMBLY
4D95L

Tata 

9 460 614 834 
 
INJECTION-PUMP ASSEMBLY
JX493ZQ
9 460 614 967 
 
INJECTION-PUMP ASSEMBLY
JX493ZQ
9 460 614 841 
 
INJECTION-PUMP ASSEMBLY
JX493Q
 
 
INJECTION-PUMP ASSEMBLY
JX493Q
9 460 615 088 
 
INJECTION-PUMP ASSEMBLY
JX493Q

Tata 

9 460 615 088 
 
INJECTION-PUMP ASSEMBLY
JX493Q

Komatsu 

9 460 614 861 
6205711480 
INJECTION-PUMP ASSEMBLY
S4D95L
 
 
INJECTION-PUMP ASSEMBLY

Tata 

 
1111300BTE 
INJECTION-PUMP ASSEMBLY
JL493QB3
Back to top