104740-1910 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047401910 8970255480

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104740-1910 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104740-1910 1047401910

ISUZU 8970255480 8970255480

Cross reference number

ZEXEL 104740-1910 1047401910

ISUZU 8970255480 8970255480

Zexel num

Bosch num

Firm num

Name

104740-1910
104740-1911

8970255480 ISUZU

INJECTION-PUMP ASSEMBLY
4FG1 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 49.1 48.6 49.6

Difference in delivery mm3/st. 3.5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 49.9 49.9 49.9

Oil temperature degC 48 46 50

Injection timing adjustment_03

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 49.1 48.1 50.1

Difference in delivery mm3/st. 3.5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_04

Pump speed r/min 2150 2150 2150

Average injection quantity mm3/st. 47.6 47.6 47.6

Oil temperature degC 52 50 54

Injection quantity adjustment

Pump speed r/min 2500 2500 2500

Average injection quantity mm3/st. 15.4 12.4 18.4

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 55 52 58

Injection quantity adjustment_02

Pump speed r/min 2850 2850 2850

Average injection quantity mm3/st. 5

Oil temperature degC 55 52 58

Injection quantity adjustment_03

Pump speed r/min 2500 2500 2500

Average injection quantity mm3/st. 15.4 12.4 18.4

Difference in delivery mm3/st. 4.5

Oil temperature degC 55 52 58

Governor adjustment

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 10.5 8.5 12.5

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 10.5 8.5 12.5

Difference in delivery mm3/st. 2

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 55 55 75

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 55 55 85

Oil temperature degC 48 46 50

Speed control lever angle

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1250 1250 1250

Overflow quantity cm3/min 310 180 440

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 1750 1750 1750

Pressure kPa 549 529 569

Pressure kgf/cm2 5.6 5.4 5.8

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 1750 1750 1750

Pressure kPa 549 529 569

Pressure kgf/cm2 5.6 5.4 5.8

Basic *

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1750 1750 1750

Timer stroke mm 4.6 4.4 4.8

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 950 950 950

Timer stroke mm 0.5 0.1 1.3

Oil temperature degC 50 48 52

_03

Pump speed r/min 1250 1250 1250

Timer stroke mm 1.7 1.3 2.1

Oil temperature degC 50 48 52

_04

Pump speed r/min 1750 1750 1750

Timer stroke mm 4.6 4.4 4.8

Basic *

Oil temperature degC 50 48 52

_05

Pump speed r/min 2300 2300 2300

Timer stroke mm 7.4 7.1 7.8

Oil temperature degC 52 50 54

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

Pump speed r/min 1750 1750 1750

Average injection quantity mm3/st. 35 34 36

Timer stroke TA mm 3.9 3.7 4.1

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1750 1750 1750

Average injection quantity mm3/st. 35 34 36

Timer stroke TA mm 3.9 3.5 4.3

Basic *

Oil temperature degC 50 48 52

_03

Pump speed r/min 1750 1750 1750

Average injection quantity mm3/st. 25 24 26

Timer stroke TA mm 2.8 2.2 3.4

Oil temperature degC 50 48 52

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 0.9 0.8 1

Pre-stroke mm 0.2 0.18 0.22

Control lever angle alpha deg. -2 -6 2

Control lever angle beta deg. 42 37 47

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

At the idle lever position, adjust so the output voltage is V (applied voltage Vi).
----------
V=0.8+-0.03(V) Vi=10(V)
----------

0000001901 V-FICD ADJUSTMENT

Adjustment of the V-FICD 1. Adjust to obtain S. Confirm full stroke when P1 {P2} negative pressure is applied. 2. Confirm that L is obtained when negative pressure P = P1 {P2} is applied to the actuator. To adjust the stroke adjust the actuator's stroke adjusting screw (C). (A) Control lever (B) Locknut (C) Stroke adjusting screw (D) Actuator (e) Actuator shaft
----------
S=1+1(mm) L=0.56+-0.2(mm) P1=-53.3(kPa) P2=-400(mmHg)
----------
S=1+1(mm) L=0.56+-0.2(mm) T=1.2~1.5(N-m)(0.12~0.15kgf-m))

0000002001 W-CSD ADJUSTMENT

Adjustment of the W-CSD Adjustment of the timer advance angle 1. Determine the timer advance angle using the graph (graph TA). 2. Adjust with the screw (A) so that the timer advance angle determined in item 1 is obtained. X:Temperature t (deg C) Y:Timer stroke TA (mm) (S) Cooling water temperature: increase direction (R) Cooling water temperature (deg C) (T) Timer piston stroke (mm) (B) Standard point N:Pump speed
----------
TA=-0.041t+2.05
----------
N1=100r/min a=20degC b=-20degC c=1.2+-0.2mm d=2.9+-0.4mm