103682-0480 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1036820480 75k47001a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 103682-0480 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 103682-0480 1036820480

NIIGATA-URAWA 75K47001A 75k47001a

Service parts 103682-0480 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 103068-1090

3. GOVERNOR 105455-1030

4. SUPPLY PUMP 105235-1900

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2)

13. NOZZLE-HOLDER

14. NOZZLE

15. NOZZLE SET

Include in #1:

103682-0480 as INJECTION-PUMP ASSEMBLY

106873-2610 as _

Cross reference number

ZEXEL 103682-0480 1036820480

NIIGATA-URAWA 75K47001A 75k47001a

Zexel num

Bosch num

Firm num

Name

103682-0480
103682-0481

75K47001A NIIGATA-URAWA

INJECTION-PUMP ASSEMBLY
6NSDL * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-4-1500

Overflow valve 131425-0120

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-4-2-6- 3-5

Pre-stroke mm 4.5 4.45 4.55

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 18.9

Pump speed r/min 725 725 725

Average injection quantity mm3/st. 725 710 740

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 9.1+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 100 90 110

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Injection quantity adjustment_03

Adjusting point C

Rack position 19.9+0.5

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 610 610 670

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Idle spring not operating (back off and set) (3)RACK LIMIT: RAL (4)Set idle sub-spring (5)Main spring setting
----------
K=25 RAL=19.9+0.5mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=29deg+-5deg b=46deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=35deg+-5deg b=45deg+-5deg

Timing setting

(1)Pump vertical direction (2)Center of pump side coupling's elongated hole at No. 6 cylinder's beginning of injection. (3)- (4)-
----------

----------
a=(50deg)