101891-6550 ZEXEL 9 400 616 221 BOSCH INJECTION-PUMP ASSEMBLY 9400616221 1018916550 3126185091

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101891-6550 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 221 9400616221

ZEXEL 101891-6550 1018916550

MITSUBISHI 3126185091 3126185091

Include in #1:

101602-1212 as _

Cross reference number

BOSCH 9 400 616 221 9400616221

ZEXEL 101891-6550 1018916550

MITSUBISHI 3126185091 3126185091

Zexel num

Bosch num

Firm num

Name

101891-6550

9 400 616 221

3126185091 MITSUBISHI

INJECTION-PUMP ASSEMBLY
8DC60 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-2-7-3- 4-5-6-8

Pre-stroke mm 2.1 2.05 2.15

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cyl.1-2 deg. 45 44.5 45.5

Difference between angles 2
Cal 1-7 deg. 90 89.5 90.5

Difference between angles 3
Cal 1-3 deg. 135 134.5 135.5

Difference between angles 4
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 5
Cal 1-5 deg. 225 224.5 225.5

Difference between angles 6
Cal 1-6 deg. 270 269.5 270.5

Difference between angles 7
Cal 1-8 deg. 315 314.5 315.5

Injection quantity adjustment

Adjusting point A

Rack position 12.5

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 128.8 124.9 132.7

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 12

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 123 118 128

Max. variation between cylinders % 0 -4 4

Fixing the rack *

Injection quantity adjustment_03

Adjusting point C

Rack position 11.3

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 108.2 103.7 112.7

Max. variation between cylinders % 0 -4 4

Fixing the rack *

Injection quantity adjustment_04

Adjusting point D

Rack position 7.2+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 17.5 14.5 20.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Timer adjustment

Pump speed r/min 250+120

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 500

Advance angle deg. 2 1.5 2.5

Timer adjustment_03

Pump speed r/min 900

Advance angle deg. 5.2 4.7 5.7

Timer adjustment_04

Pump speed r/min 1200

Advance angle deg. 8 7.5 8.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Control lever's minimum speed setting (4)Control lever's full speed setting (5)Idle sub spring setting: L1.
----------
K=5 RAL=13.3+0.5mm L1=6.2-0.2mm
----------

Speed control lever angle

I:Idle S:Stop (1)Set the pump speed at aa (2)Set the pump speed at bb.
----------
aa=900r/min bb=750r/min
----------
a=(13deg) b=32deg+-3deg c=(22deg) d=(5deg)