101692-9290 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016929290

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101692-9290 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101692-9290 1016929290

Service parts 101692-9290 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101069-3740

3. GOVERNOR 105401-0380

4. SUPPLY PUMP 105220-7050

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105661-0401

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6690

11. Nozzle and Holder 16600-Z5519

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-4650

14. NOZZLE

105015-6380

15. NOZZLE SET

Include in #1:

101601-6290 as _

101692-9290 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101692-9290 1016929290

Zexel num

Bosch num

Firm num

Name

101692-9290

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 132424-0620

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.4 3.35 3.45

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 13.6

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 83 81 85

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the lever *

Boost pressure kPa 24 24

Boost pressure mmHg 180 180

Injection quantity adjustment_02

Adjusting point B

Rack position R1(12.3)

Pump speed r/min 550 550 550

Average injection quantity mm3/st. 59.7 58.7 60.7

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_03

Adjusting point C

Rack position 9.5+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 8 6.2 9.8

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 550 550 550

Rack position R1(12.3)

Boost pressure kPa 4 2.7 5.3

Boost pressure mmHg 30 20 40

Boost compensator adjustment_02

Pump speed r/min 550 550 550

Rack position 13.6

Boost pressure kPa 10.7 10.7 10.7

Boost pressure mmHg 80 80 80

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)When excess fuel lever for starting operates (at boost pressure 0): SXL (4)Boost compensator stroke (5)Set idle sub-spring (6)Main spring setting
----------
K=7 SXL=16.2+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(4deg)+-5deg b=(14deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

0000001101

N:Normal B:When boosted (1)Rack position = aa (point D) at boost pressure 0.
----------
aa=16.2+-0.1mm
----------
a=(15deg) b=(30deg)

0000001501 GOV FULL LOAD ADJUSTMENT

Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Maximum no-load speed (r/min) LABEL9:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)At high idle rack position L
----------
L=9.5mm
----------
a1=A a2=B a3=C a4=- a5=- a6=- r1=750r/min r2=750r/min r3=750r/min r4=- r5=- r6=- Q1=86.5+-2mm3/st Q2=83+-2mm3/st Q3=76+-2mm3/st Q4=- Q5=- Q6=- c1=+-3.5% c2=+-3.5% c3=+-3.5% c4=- c5=- c6=- a7=25 a8=24 a9=23 a10=22 a11=21 a12=20 a13=19 a14=18 a15=17 a16=16 a17=15 a18=14 a19=- a20=- a21=- a22=- a23=- a24=- a25=- a26=- a27=- a28=- r7=1250r/min r8=1200r/min r9=1150r/min r10=1100r/min r11=1050r/min r12=1000r/min r13=950r/min r14=900r/min r15=850r/min r16=800r/min r17=750r/min r18=700r/min r19=- r20=- r21=- r22=- r23=- r24=- r25=- r26=- r27=- r28=- R7=1340+-31r/min R8=1290+-30r/min R9=1235+-28r/min R10=1180+-27r/min R11=1130+-26r/min R12=1075+-25r/min R13=1020+-23r/min R14=965+-22r/min R15=915+-22r/min R16=860+-20r/min R17=805+-18r/min R18=750+-17r/min R19=- R20=- R21=- R22=- R23=- R24=- R25=- R26=- R27=- R28=-

Timing setting

(1)Pump vertical direction (2)Position of coupling's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)