101692-3193 ZEXEL 9 400 616 026 BOSCH INJECTION-PUMP ASSEMBLY 9400616026 1016923193 6206711331


 

Information injection-pump assembly

BOSCH 9 400 616 026 9400616026
ZEXEL 101692-3193 1016923193
KOMATSU 6206711331 6206711331
101692-3193 INJECTION-PUMP ASSEMBLY
Rating:
59
Buy INJECTION-PUMP ASSEMBLY 101692-3193 zexel genuine, new aftermarket engine parts with delivery

Service parts 101692-3193 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101069-9180
3. GOVERNOR 105400-3591
4. SUPPLY PUMP 105220-5280
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4110
11. Nozzle and Holder 6207-11-3100
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105048-3060
14. NOZZLE 105017-0090
15. NOZZLE SET

Include in #1:

101692-3193 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
101692-3193 
101692-3320 
9 400 616 026 
6206711331  KOMATSU
INJECTION-PUMP ASSEMBLY
6D95L K




Information:

Engine Lifting
When it is necessary to remove a component on an angle, remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90°. Eyebolts and brackets should never be bent and should only be loaded in tension.
Use a hoist to remove heavy components. Lift the engine by using an adjustable lifting beam. All supporting members (chains and cables) should be parallel to each other, and as near perpendicular as possible to the top of the object being lifted.Some removals require the use of lifting fixtures to obtain proper balance and to provide safe handling. To remove the engine, use the two lifting eyes on the engine.Lifting eyes are designed for the arrangement as sold. Alterations to lifting eyes and/or arrangement weight make the lifting devices obsolete.If you make alterations, you are responsible for providing adequate lifting devices.Engine Storage
If the engine will not be or has not been started for several weeks, the lubricating oil will drain from the cylinder walls and piston rings.If an engine remains out of service and its use is not immediately planned, special precautions should be taken. Rust can form on the cylinder liner surface, which will increase engine wear and may result in shorter engine life. To prevent this problem from becoming excessive, be sure all lubrication recommendations mentioned in the Maintenance Schedule are completed.If freezing temperatures are expected, check the cooling system for adequate protection against freezing. A 50/50 solution of Caterpillar (permanent-type) Antifreeze and approved water will give protection to -20°F (-29°C).If it will be impossible to start the engine periodically, consult your Caterpillar dealer for instructions to prepare your engine for longer storage periods.Refer to Storage Procedures For Caterpillar Products, form SEHS9031 for more detailed information on engine storage.

Have questions with 101692-3193?





Group cross 101692-3193 ZEXEL

Komatsu 

 
6206711230 
INJECTION-PUMP ASSEMBLY
6D95L
9 400 610 216 
6207711320 
INJECTION-PUMP ASSEMBLY
S6D95L
 
6206711120 
INJECTION-PUMP ASSEMBLY
6D95L
9 400 616 024 
6206711330 
INJECTION-PUMP ASSEMBLY
6D95L
9 400 610 299 
6207711330 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 616 025 
6207711420 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 610 217 
6206711420 
INJECTION-PUMP ASSEMBLY
6D95L
 
6207711370 
INJECTION-PUMP ASSEMBLY
S6D95L
 
6206711260 
INJECTION-PUMP ASSEMBLY
6D95L
101692-3193  

101692-3320 
9 400 616 026 
6206711331 
INJECTION-PUMP ASSEMBLY
6D95L
Back to top