101641-9110 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016419110

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101641-9110 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101641-9110 1016419110

Service parts 101641-9110 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101064-9030

3. GOVERNOR 105410-6700

4. SUPPLY PUMP 105220-4950

5. AUTOM. ADVANCE MECHANIS 105622-0680

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105141-1800

11. Nozzle and Holder 16600-90019

12. Open Pre:MPa(Kqf/cm2) 9.8{100}

13. NOZZLE-HOLDER 105071-1240

14. NOZZLE

105000-1010

15. NOZZLE SET

Include in #1:

101641-9110 as INJECTION-PUMP ASSEMBLY

Include in #2:

104749-3100 as _

Cross reference number

ZEXEL 101641-9110 1016419110

Zexel num

Bosch num

Firm num

Name

101641-9110

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 2.3 2.25 2.35

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 8.8

Pump speed r/min 1550 1550 1550

Average injection quantity mm3/st. 39 38 40

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 6.6+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 8 6.9 9.1

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Timer adjustment

Pump speed r/min 500

Advance angle deg. 0.5

Timer adjustment_02

Pump speed r/min 1100

Advance angle deg. 2.2 1.7 2.7

Timer adjustment_03

Pump speed r/min 1650

Advance angle deg. 5.4 4.9 5.9

Timer adjustment_04

Pump speed r/min -

Advance angle deg. 7.5 7.5 7.5

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL
----------
K=15 RAL=10.9+0.2mm
----------

Speed control lever angle

F:Full speed I:Idle S:Stop
----------

----------
a=26deg+-5deg b=34deg+-5deg c=32deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=10deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=M a2=F r1=1550r/min r2=1550r/min Q1=39+-1mm3/st Q2=37.5+-1mm3/st c1=+-2.5% c2=+-2.5% a3=M a4=F r3=1650r/min r4=1600r/min