101631-9730 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016319730 1679090164


101631-9730 INJECTION-PUMP ASSEMBLY
Rating:
60
Buy INJECTION-PUMP ASSEMBLY 101631-9730 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101631-9730 1016319730
NISSAN-DIESEL 1679090164 1679090164

Service parts 101631-9730 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101063-9250
3. GOVERNOR 105410-6590
4. SUPPLY PUMP 105220-4950
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-1210
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 9.8(100)
13. NOZZLE-HOLDER 105071-1080
14. NOZZLE 105000-1010
15. NOZZLE SET

Include in #1:

101631-9730 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

ZEXEL 101631-9730 1016319730
NISSAN-DIESEL 1679090164 1679090164


Zexel num
Bosch num
Firm num
Name
101631-9730 
 
1679090164  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
SD33 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   2.3 2.25 2.35
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   14.3
Pump speed r/min   1550 1550 1550
Average injection quantity mm3/st.   37 36 38
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.3+-0. 5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   75 74 76
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Timer adjustment
Pump speed r/min   500+-50
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   1 0.5 1.5
Timer adjustment_03
Pump speed r/min   1100
Advance angle deg.   2.8 2.1 3.6
Timer adjustment_04
Pump speed r/min   1500
Advance angle deg.   5 4.5 5.5
Timer adjustment_05
Pump speed r/min   1800
Advance angle deg.   7.5 7 8
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101631-9730
N:Pump speed R:Rack position (mm) (1)Target notch: K
----------
K=6
----------

Speed control lever angle

Test data 101631-9730
F:Full speed I:Idle S:Stop
----------

----------
a=22deg+-5deg b=36deg+-5deg c=32deg+-3deg

Stop lever angle

Test data 101631-9730
N:Pump normal S:Stop the pump.
----------

----------
a=10deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Test data 101631-9730
Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=M a2=F r1=1550r/min r2=1550r/min Q1=37+-1mm3/st Q2=33.2+-1mm3/st c1=+-2.5% c2=+-2.5% a3= a4= r3= r4=

Timing setting

Test data 101631-9730
(1)Pump vertical direction (2)Position of gear mark 'Y' at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(130deg)




Have questions with 101631-9730?





Group cross 101631-9730 ZEXEL

Nissan-Diesel 

9 400 615 927 
16700C6812 
INJECTION-PUMP ASSEMBLY
SD33
9 400 615 928 
1670090061 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 615 929 
1679090163 
INJECTION-PUMP ASSEMBLY
SD33
101631-9730  
 
1679090164 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 277 
16700C8602 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 278 
16700C8603 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
16700C8601 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 046 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 060 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 068 
16700C8605 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
16700C8606 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
 
 
INJECTION-PUMP ASSEMBLY
SD33
9 400 610 279 
16700C8604 
INJECTION-PUMP ASSEMBLY
SD33
Back to top