Buy 101609-9360 ZEXEL F 01G 09U 1HV BOSCH INJECTION-PUMP ASSEMBLY f01g09u1hv 1016099360 3436511010

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101609-9360 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09U 1HV f01g09u1hv

ZEXEL 101609-9360 1016099360

MITSUBISHI-HEAV 3436511010 3436511010

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

OCTOT Fuel Injection Pump 212-8559 106675-4900 101609-9360 Fits For Caterpillar CAT Engine 3066 S6K Excavator 320D 320C 321C 323D 320DL

$1,191.78

15 Nov 2024

CN: JC-Construction mach

OCTOT Fuel Injection Pump 212-8559 106675-4900 101609-9360 Fits For Caterpillar CAT Engine 3066 S6K Excavator 320D 320C 321C 323D 320DL
OCTOT Part Name: Fuel Injection Pump || Part Number: 212-8559 106675-4900 101609-9360 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: 3066 || Applicable: Fits For Caterpillar CAT Engine 3066 S6K Excavator 320D 320C 321C 323D 320DL || Package included: 1pcs Fuel Injection Pump 212-8559 106675-4900 101609-9360

Haiyazhma Fuel Injection Pump 212-8559 106675-4900 101609-9360 Compatible with Caterpillar CAT Engine 3066 S6K Excavator 320D 320C 321C 323D 320DL

$1,190.00

15 Nov 2024

CN: Xiehaparts

Haiyazhma Fuel Injection Pump 212-8559 106675-4900 101609-9360 Compatible with Caterpillar CAT Engine 3066 S6K Excavator 320D 320C 321C 323D 320DL
Haiyazhma Part Name: Fuel Injection Pump || Part Number: 212-8559 106675-4900 101609-9360 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: 3066 || Applicable: Compatible with Caterpillar CAT Engine 3066 S6K Excavator 320D 320C 321C 323D 320DL || Package included: 1pcs Fuel Injection Pump 212-8559 106675-4900 101609-9360

Fuel Injection Pump Compatible With 3066 S6KT Engine 320C 201-3780 10R-7651 101609-9360 Engine Excavator Replacement Parts

$4,381.63

01 Nov 2024
0.1102[0.05] pounds
CN: DingJuHeZhiMin SHOP

Fuel Injection Pump Compatible With 3066 S6KT Engine 320C 201-3780 10R-7651 101609-9360 Engine Excavator Replacement Parts
HZMehi Quick start: Shorten engine start time and improve driving experience. || Low noise: Optimized design to reduce operating noise and improve comfort. || Easy installation: reasonable design, easy to install and replace. || Automatic regulation: Automatically adjusts fuel pressure according to engine requirements. || Cold start performance: It can still work normally under low temperature conditions.

Service parts 101609-9360 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101062-8520

3. GOVERNOR 105419-5300

4. SUPPLY PUMP

105220-7180

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156643-5820

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105119-4090

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 17.7(180)

13. NOZZLE-HOLDER 105048-4530

14. NOZZLE 105017-9370

15. NOZZLE SET

Include in #1:

101609-9360 as INJECTION-PUMP ASSEMBLY

101672-9140 as _

Cross reference number

BOSCH F 01G 09U 1HV f01g09u1hv

ZEXEL 101609-9360 1016099360

MITSUBISHI-HEAV 3436511010 3436511010

Zexel num

Bosch num

Firm num

Name

101609-9360

F 01G 09U 1HV

3436511010 MITSUBISHI-HEAV

INJECTION-PUMP ASSEMBLY
S6K-T K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-5720

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.55 3.5 3.6

Rack position
After adjusting injection quantity. R=A

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 9.8

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 120.5 119.5 121.5

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point C

Rack position 5.8+-0.5

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 9.5 8.2 10.8

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Injection quantity adjustment_03

Adjusting point D

Rack position 10++

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 125 125 130

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Rack difference between N = N1 and N = N2 (5)Set idle sub-spring
----------
K=5 N1=900r/min N2=350r/min
----------

Speed control lever angle

F:Full speed I:Idle S:Stop (1)Stopper bolt setting
----------

----------
a=31deg+-3deg b=12deg+-5deg c=6deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the hole at R = aa (2)Speed = bb, rack position = cc (sealed at delivery) (3)Normal
----------
aa=25mm bb=0r/min cc=1-0.5mm
----------
a=21deg+-5deg b=(55deg)

0000001501 I/P WITH LOAD PLUNGER ADJ

Load plunger-equipped pump adjustment 1. Adjust the variation between cylinders and the injection quantity. 2. At Full point A, adjust the pre-stroke to the specified value. 3. After pre-stroke adjustment, reconfirm that the fuel injection quantity and the variation between cylinders is as specified.
----------

----------

Timing setting

(1)Pump vertical direction (2)Position of gear mark '3' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)After adjusting the injection quantity, adjust at rack position bb.
----------
aa=6deg bb=(9.8)mm
----------
a=(110deg)