101608-1802 ZEXEL 9 400 619 938 BOSCH INJECTION-PUMP ASSEMBLY 9400619938 1016081802 me078437

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101608-1802 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 938 9400619938

ZEXEL 101608-1802 1016081802

MITSUBISHI ME078437 me078437

Service parts 101608-1802 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101061-8760

3. GOVERNOR 105411-2900

4. SUPPLY PUMP 105210-5451

5. AUTOM. ADVANCE MECHANIS 105672-9010

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105160-4190

11. Nozzle and Holder ME078067

12. Open Pre:MPa(Kqf/cm2) 17.7{180}

13. NOZZLE-HOLDER 105030-3350

14. NOZZLE 105025-0370

15. NOZZLE SET

Include in #1:

101608-1802 as INJECTION-PUMP ASSEMBLY

Include in #2:

104748-1704 as _

Cross reference number

BOSCH 9 400 619 938 9400619938

ZEXEL 101608-1802 1016081802

MITSUBISHI ME078437 me078437

Zexel num

Bosch num

Firm num

Name

101608-1802
101608-1803

9 400 619 938

ME078437 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D16T * K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-5520

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.5 4.45 4.55

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10.6

Pump speed r/min 1400 1400 1400

Average injection quantity mm3/st. 106 105 107

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Boost pressure kPa 44 44

Boost pressure mmHg 330 330

Injection quantity adjustment_02

Adjusting point C

Rack position 8+-0.5

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 8 6.5 9.5

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Boost compensator adjustment

Pump speed r/min 650 650 650

Rack position R1-0.9

Boost pressure kPa 20 17.3 22.7

Boost pressure mmHg 150 130 170

Boost compensator adjustment_02

Pump speed r/min 650 650 650

Rack position R1(10.6)

Boost pressure kPa 30.7 24 37.4

Boost pressure mmHg 230 180 280

Timer adjustment

Pump speed r/min 1150--

Advance angle deg. 0 0 0

Load 4/4

Remarks
Beginning of advance.

Timer adjustment_02

Pump speed r/min 450

Advance angle deg. 2 1.5 2.5

Load 0/4

Remarks
Start

Timer adjustment_03

Pump speed r/min (550)

Advance angle deg. 0 0 0

Load 0/4

Remarks
Measure the actual speed.

Timer adjustment_04

Pump speed r/min 1100

Advance angle deg. 0.5

Load 4/4

Timer adjustment_05

Pump speed r/min 1400

Advance angle deg. 2.5 2 3

Load 4/4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Main spring setting (4)Set idle sub-spring (5)Boost compensator stroke: BCL
----------
K=13 BCL=0.9+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(30deg)+-5deg b=(20deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Normal (2)Pump speed aa and rack position bb (to be sealed at delivery)
----------
aa=0r/min bb=4-0.5mm
----------
a=28deg+-5deg b=(48deg)

0000001501 TAMPER PROOF

Tamperproofing-equipped boost compensator cover installation procedure (A) After adjusting the boost compensator, tighten the bolts to remove the heads. (1)Before adjusting the governor and the boost compensator, tighten the screw to the specified torque. (Tightening torque T = T1 maximum) (2)After adjusting the governor and the boost compensator, tighten to the specified torque to break off the bolt heads. (Tightening torque T = T2)
----------
T1=2.5N-m(0.25kgf-m) T2=2.9~4.4N-m(0.3~0.45kgf-m)
----------

Timing setting

(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=10deg
----------
a=(1deg)