101607-9520 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016079520


101607-9520 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 101607-9520 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101607-9520 1016079520

Cross reference number

ZEXEL 101607-9520 1016079520


Zexel num
Bosch num
Firm num
Name
101607-9520 
 
  DPICO
INJECTION-PUMP ASSEMBLY
6D16 * Q

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.3 3.25 3.35
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   B
Rack position   10.1
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   51.7 50.7 52.7
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   8.8+-0.5
Pump speed r/min   285 285 285
Average injection quantity mm3/st.   10 8.5 11.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   71 61 81
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1200++
Advance angle deg.   0 0 0
Remarks
Do not advance until starting N = 1200.
 
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   1.5 1.5 1.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101607-9520
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Rack difference between N = N1 and N = N2
----------
K=16 N1=1200r/min N2=750r/min
----------

Speed control lever angle

Test data 101607-9520
F:Full speed I:Idle S:Stop
----------

----------
a=19deg+-5deg b=19deg+-5deg c=35deg+-3deg

Stop lever angle

Test data 101607-9520
N:Pump normal S:Stop the pump.
----------

----------
a=2.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101607-9520
(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=18deg
----------
a=(2deg)




Have questions with 101607-9520?





Group cross 101607-9520 ZEXEL

Dpico 

9 400 611 752 
 
INJECTION-PUMP ASSEMBLY
6D22
9 400 619 449 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D16
101607-9520  
 
 
INJECTION-PUMP ASSEMBLY
6D16

Nissan-Diesel 

9 400 610 731 
16713Z6509 
INJECTION-PUMP ASSEMBLY
D539X
9 400 610 732 
16713Z6510 
INJECTION-PUMP ASSEMBLY
D539X
 
16713Z6511 
INJECTION-PUMP ASSEMBLY
FE6B

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16
Back to top