101607-6520 ZEXEL 9 400 615 709 BOSCH INJECTION-PUMP ASSEMBLY 9400615709 1016076520 me077808


101607-6520 INJECTION-PUMP ASSEMBLY
Rating:
30
Buy INJECTION-PUMP ASSEMBLY 101607-6520 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 709 9400615709
ZEXEL 101607-6520 1016076520
MITSUBISHI ME077808 me077808

Include in #1:

Cross reference number

BOSCH 9 400 615 709 9400615709
ZEXEL 101607-6520 1016076520
MITSUBISHI ME077808 me077808


Zexel num
Bosch num
Firm num
Name
101607-6520 
9 400 615 709 
ME077808  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D16 K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-8420
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.7
Pump speed r/min   850 850 850
Each cylinder's injection qty mm3/st.   77.4 75.1 79.7
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   Z
Rack position   9.5+-0.5
Pump speed r/min   800 800 800
Each cylinder's injection qty mm3/st.   10.8 9.2 12.4
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(11.7)
Pump speed r/min   850 850 850
Average injection quantity mm3/st.   77.4 76.4 78.4
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+0.55
Pump speed r/min   1450 1450 1450
Average injection quantity mm3/st.   87.7 83.7 91.7
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   C
Rack position   R1-0.4
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   56 52 60
Fixing the lever   *
Injection quantity adjustment_06
Adjusting point   E
Rack position   (R1+0.5)
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   87.6 83.6 91.6
Fixing the lever   *
Injection quantity adjustment_07
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   91 81 101
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1150--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1100
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1450
Advance angle deg.   6 5.5 6.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101607-6520
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=H50
----------

Speed control lever angle

Test data 101607-6520
F:Full speed I:Idle (1)Accelerator lever (2)Use the hole at R = aa (3)Stopper bolt set position 'H'
----------
aa=35mm
----------
a=33deg+-5deg b=(42deg)+-3deg

Stop lever angle

Test data 101607-6520
N:Pump normal S:Stop the pump. (1)Set the stopper bolt at pump speed = aa and rack position = bb (non-injection rack position). Confirm non-injection. (2)After setting the stopper bolt, confirm non-injection at speed cc. Rack position = dd (non-injection rack position).
----------
aa=1450r/min bb=7.2-0.5mm cc=275r/min dd=(8.8)mm
----------
a=32.5deg+-5deg b=25deg+-5deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=400r/min Ra=9.2+-0.1mm
----------

Timing setting

Test data 101607-6520
(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=10deg
----------
a=(1deg)




Have questions with 101607-6520?





Group cross 101607-6520 ZEXEL

Mitsubishi 

9 400 615 707 
ME075590 
INJECTION-PUMP ASSEMBLY
6D15T3
9 400 615 708 
ME075589 
INJECTION-PUMP ASSEMBLY
6D16
101607-6520  
9 400 615 709 
ME077808 
INJECTION-PUMP ASSEMBLY
6D16
9 400 615 710 
ME077810 
INJECTION-PUMP ASSEMBLY
6D17
9 400 615 711 
ME077809 
INJECTION-PUMP ASSEMBLY
6D17
9 400 615 712 
ME077811 
INJECTION-PUMP ASSEMBLY
6D17
9 400 615 713 
ME076431 
INJECTION-PUMP ASSEMBLY
6D15T3
9 400 615 714 
ME076432 
INJECTION-PUMP ASSEMBLY
6D15T3
9 400 610 711 
ME077821 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
9 400 619 442 
 
INJECTION-PUMP ASSEMBLY
9 400 619 443 
 
INJECTION-PUMP ASSEMBLY
9 400 619 444 
 
INJECTION-PUMP ASSEMBLY
F 019 Z10 289 
 
INJECTION-PUMP ASSEMBLY
9 400 613 503 
 
INJECTION-PUMP ASSEMBLY
9 400 619 445 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

 
 
INJECTION-PUMP ASSEMBLY
6D17-2
Back to top