101607-1020 ZEXEL 9 400 615 585 BOSCH INJECTION-PUMP ASSEMBLY 9400615585 1016071020 me076619


101607-1020 INJECTION-PUMP ASSEMBLY
Rating:
60
Buy INJECTION-PUMP ASSEMBLY 101607-1020 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 585 9400615585
ZEXEL 101607-1020 1016071020
MITSUBISHI ME076619 me076619

Include in #1:

Cross reference number

BOSCH 9 400 615 585 9400615585
ZEXEL 101607-1020 1016071020
MITSUBISHI ME076619 me076619


Zexel num
Bosch num
Firm num
Name
101607-1020 
101607-1830 
9 400 615 585 
ME076619  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D15T2 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-5520
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
RED3 control unit part number   407910-2 470
RED3 rack sensor specifications mm   15
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.2 3.15 3.25
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Rack position   (11.2)
Vist V   1.76 1.76 1.76
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   90.6 89.6 91.6
Max. variation between cylinders %   0 -3 3
Basic   *
Injection quantity adjustment_02
Rack position   (7.4)
Vist V   2.5 2.4 2.6
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   10.5 8.8 12.2
Max. variation between cylinders %   0 -15 15

Test data Ex:

Governor adjustment

Test data 101607-1020
(1)Adjusting range (2)Step response time (N): Speed of the pump (L): Load (theta) Advance angle (Srd1) Step response time 1 (Srd2) Step response time 2 1. Adjusting conditions for the variable timer (1)Adjust the clearance between the pickup and the protrusion to L.
----------
L=1.5+-0.2mm N2=800r/min C2=(8deg) t1=2--sec. t2=2--sec.
----------
N1=1400r/min P1=0kPa(0kgf/cm2) P2=392kPa(4kgf/cm2) C1=0.5--deg C2=8+-0.3deg R01=0/4load R02=4/4load

Speed control lever angle

Test data 101607-1020
N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Rack position bb
----------
aa=16mm bb=1mm
----------
a=29deg+-5deg b=2deg+-5deg

0000000901

Test data 101607-1020
(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=11deg
----------
a=(1deg)

Stop lever angle

Test data 101607-1020
(Rs) rack sensor specifications (C/U) control unit part number (V) Rack sensor output voltage (R) Rack position (mm) 1. Confirming governor output characteristics (rack 15 mm, span 6 mm) (1)When the output voltages of the rack sensor are V1 and V2, check that the rack positions R1 and R2 in the table above are satisfied.
----------

----------




Have questions with 101607-1020?





Group cross 101607-1020 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 584 
ME076621 
INJECTION-PUMP ASSEMBLY
6D16
9 400 613 501 
ME076603 
INJECTION-PUMP ASSEMBLY
6D15T2
101607-1020  

101607-1830 
9 400 615 585 
ME076619 
INJECTION-PUMP ASSEMBLY
6D15T2
9 400 615 586 
ME076606 
INJECTION-PUMP ASSEMBLY
6D16
F 01G 09U 04V 
 
INJECTION-PUMP ASSEMBLY
F 01G 09U 04W 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 587 
ME076623 
INJECTION-PUMP ASSEMBLY
6D16
9 400 615 588 
ME076602 
INJECTION-PUMP ASSEMBLY
6D15T2
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 083 
ME076604 
INJECTION-PUMP ASSEMBLY
6D16
F 01G 09U 04X 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 615 589 
ME076605 
INJECTION-PUMP ASSEMBLY
6D16
F 01G 09U 04Y 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 01G 09U 04Z 
ME076607 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

 
ME076608 
INJECTION-PUMP ASSEMBLY
6D16
Back to top