101606-9382 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016069382 16713z6210


101606-9382 INJECTION-PUMP ASSEMBLY
Rating:
84
Buy INJECTION-PUMP ASSEMBLY 101606-9382 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101606-9382 1016069382
NISSAN-DIESEL 16713Z6210 16713z6210

Service parts 101606-9382 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-5270
3. GOVERNOR 105921-7041
4. SUPPLY PUMP 105220-7010
5. AUTOM. ADVANCE MECHANIS 105614-3600
6. COUPLING PLATE 105662-1340
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-6890
11. Nozzle and Holder 16600-Z5609
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105030-3490
14. NOZZLE 105015-9460
15. NOZZLE SET

Include in #1:

101606-9382 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101606-9382 1016069382
NISSAN-DIESEL 16713Z6210 16713z6210


Zexel num
Bosch num
Firm num
Name
101606-9382 
101606-9383 
 
16713Z6210  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6E * K 14BF PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-1520
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.7 3.65 3.75
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   11.4
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   75.7 74.1 77.3
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   A
Rack position   R1(11.4)
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   75.7 74.7 76.7
Basic   *
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   B
Rack position   R1-0.05
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   85 81 89
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   C
Rack position   R1-0.35
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   61 57.8 64.2
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   105 105 115
Fixing the lever   *
Rack limit   *
Injection quantity adjustment_06
Adjusting point   H'
Rack position   9.5+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   12.5 10.7 14.3
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   (1087)
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1200
Advance angle deg.   1.5 1 2
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   5.5 5 6
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101606-9382
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=J01
----------

Speed control lever angle

Test data 101606-9382
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=36mm
----------
a=20.5deg+-5deg b=(32.5deg)+-3deg

Stop lever angle

Test data 101606-9382
N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=42mm
----------
a=40deg+-5deg b=25deg+-5deg

Timing setting

Test data 101606-9382
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101606-9382?





Group cross 101606-9382 ZEXEL

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D22
F 019 Z10 994 
 
INJECTION-PUMP ASSEMBLY
6D22

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D22
F 019 Z10 995 
 
INJECTION-PUMP ASSEMBLY
6D22

Nissan-Diesel 

 
16713Z6108 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 615 561 
16713Z6109 
INJECTION-PUMP ASSEMBLY
FE6B

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 

Nissan-Diesel 

 
16713Z6114 
INJECTION-PUMP ASSEMBLY
FE6E
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

101606-9382  

101606-9383 
 
16713Z6210 
INJECTION-PUMP ASSEMBLY
FE6E
9 400 615 562 
16713Z6907 
INJECTION-PUMP ASSEMBLY
FE6E
 
16713Z6115 
INJECTION-PUMP ASSEMBLY
FE6E
Back to top