101606-9210 ZEXEL 9 400 615 557 BOSCH INJECTION-PUMP ASSEMBLY 9400615557 1016069210 16713z6069


101606-9210 INJECTION-PUMP ASSEMBLY
Rating:
40
Buy INJECTION-PUMP ASSEMBLY 101606-9210 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 557 9400615557
ZEXEL 101606-9210 1016069210
NISSAN-DIESEL 16713Z6069 16713z6069

Service parts 101606-9210 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-5190
3. GOVERNOR 105921-6910
4. SUPPLY PUMP 105220-7020
5. AUTOM. ADVANCE MECHANIS 105614-3590
6. COUPLING PLATE 105662-1340
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-6340
11. Nozzle and Holder 16600-Z5600
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4650
14. NOZZLE 105015-8750
15. NOZZLE SET

Include in #1:

101606-9210 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 615 557 9400615557
ZEXEL 101606-9210 1016069210
NISSAN-DIESEL 16713Z6069 16713z6069


Zexel num
Bosch num
Firm num
Name
101606-9210 
9 400 615 557 
16713Z6069  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6A K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   10.8
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   56.1 54.5 57.7
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   8.7 6.9 10.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(10.8)
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   56.1 55.1 57.1
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+0.2
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   70.4 66.4 74.4
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   81 81 91
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   (1140)
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1500
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101606-9210
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=G62
----------

Speed control lever angle

Test data 101606-9210
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=100mm
----------
a=26.5deg+-5deg b=47.5deg+-3deg

Stop lever angle

Test data 101606-9210
N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=42mm
----------
a=27deg+-5deg b=40deg+-5deg

Timing setting

Test data 101606-9210
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101606-9210?





Group cross 101606-9210 ZEXEL

Nissan-Diesel 

9 400 615 556 
16713Z6064 
INJECTION-PUMP ASSEMBLY
FE6A
101606-9210  
9 400 615 557 
16713Z6069 
INJECTION-PUMP ASSEMBLY
FE6A
 
16713Z6070 
INJECTION-PUMP ASSEMBLY
FE6E
F 019 Z10 116 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 615 558 
16713Z6075 
INJECTION-PUMP ASSEMBLY
FE6A
F 019 Z10 368 
16713Z6079 
INJECTION-PUMP ASSEMBLY
FE6E
9 400 615 559 
16713Z6910 
INJECTION-PUMP ASSEMBLY
FE6E

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D16

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16

Nissan-Diesel 

9 400 615 560 
16713Z6113 
INJECTION-PUMP ASSEMBLY
FE6B

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D22
F 019 Z10 993 
 
INJECTION-PUMP ASSEMBLY
6D22
Back to top