101606-9280 ZEXEL 9 400 615 560 BOSCH INJECTION-PUMP ASSEMBLY 9400615560 1016069280 16713z6113


101606-9280 INJECTION-PUMP ASSEMBLY
Rating:
54
Buy INJECTION-PUMP ASSEMBLY 101606-9280 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 560 9400615560
ZEXEL 101606-9280 1016069280
NISSAN-DIESEL 16713Z6113 16713z6113

Service parts 101606-9280 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-5260
3. GOVERNOR 105921-5430
4. SUPPLY PUMP 105220-7060
5. AUTOM. ADVANCE MECHANIS 105672-0270
6. COUPLING PLATE 105661-0391
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6690
11. Nozzle and Holder 16600-Z5519
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4650
14. NOZZLE 105015-6380
15. NOZZLE SET

Include in #1:

101606-9280 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 615 560 9400615560
ZEXEL 101606-9280 1016069280
NISSAN-DIESEL 16713Z6113 16713z6113


Zexel num
Bosch num
Firm num
Name
101606-9280 
9 400 615 560 
16713Z6113  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6B K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-1420
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   12
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   74 72.4 75.6
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   10.4 8.6 12.2
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12)
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   74 73 75
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1+0.05
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   85.5 81.5 89.5
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   80 80 90
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   -
Advance angle deg.   0.5
Remarks
Measure the actual speed.
 
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   6.5 6.5 6.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101606-9280
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=G08
----------

Speed control lever angle

Test data 101606-9280
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H' (3)Bottom lever
----------
aa=36mm
----------
a=26.5deg+-5deg b=36deg+-3deg

Stop lever angle

Test data 101606-9280
N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=40deg+-5deg

Timing setting

Test data 101606-9280
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101606-9280?





Group cross 101606-9280 ZEXEL

Nissan-Diesel 

9 400 615 556 
16713Z6064 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 615 557 
16713Z6069 
INJECTION-PUMP ASSEMBLY
FE6A
 
16713Z6070 
INJECTION-PUMP ASSEMBLY
FE6E
F 019 Z10 116 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 615 558 
16713Z6075 
INJECTION-PUMP ASSEMBLY
FE6A
F 019 Z10 368 
16713Z6079 
INJECTION-PUMP ASSEMBLY
FE6E
9 400 615 559 
16713Z6910 
INJECTION-PUMP ASSEMBLY
FE6E

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D16

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D16
 
 
INJECTION-PUMP ASSEMBLY
6D16

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D16

Nissan-Diesel 

101606-9280  
9 400 615 560 
16713Z6113 
INJECTION-PUMP ASSEMBLY
FE6B

Hyundai 

 
 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
6D22
F 019 Z10 993 
 
INJECTION-PUMP ASSEMBLY
6D22
Back to top