101605-9771 ZEXEL 9 400 611 328 BOSCH INJECTION-PUMP ASSEMBLY 9400611328 1016059771 3436112051

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101605-9771 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 328 9400611328

ZEXEL 101605-9771 1016059771

MITSUBISHI-HEAV 3436112051 3436112051

Service parts 101605-9771 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101062-8290

3. GOVERNOR 105419-3130

4. SUPPLY PUMP 105220-7090

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-5210

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2)

13. NOZZLE-HOLDER 105048-3330

14. NOZZLE

105017-1180

15. NOZZLE SET

Include in #1:

101401-4723 as _

101605-9771 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 611 328 9400611328

ZEXEL 101605-9771 1016059771

MITSUBISHI-HEAV 3436112051 3436112051

Zexel num

Bosch num

Firm num

Name

101605-9771

9 400 611 328

3436112051 MITSUBISHI-HEAV

INJECTION-PUMP ASSEMBLY
S6K-T K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-5720

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 9.2

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 100.5 99.5 101.5

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point C

Rack position 5.6+-0.5

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 11 9.7 12.3

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Injection quantity adjustment_03

Adjusting point D

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 100 100 110

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Idle sub spring setting: L1.
----------
K=7 L1=5.2+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(3deg)+-5deg b=(12deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Normal (2)Contacts outer boss. (3)Contacts inner boss.
----------

----------
a=53deg+-5deg b=26.5deg+-5deg c=(9deg)