101605-9791 ZEXEL 9 400 612 497 BOSCH INJECTION-PUMP ASSEMBLY 9400612497 1016059791


101605-9791 INJECTION-PUMP ASSEMBLY
Rating:
34
Buy INJECTION-PUMP ASSEMBLY 101605-9791 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 497 9400612497
ZEXEL 101605-9791 1016059791

Service parts 101605-9791 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101062-8490
3. GOVERNOR 105411-2240
4. SUPPLY PUMP 105220-6280
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156639-6620
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-4660
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105031-3862
14. NOZZLE 105025-1390
15. NOZZLE SET

Include in #1:

101605-9791 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 497 9400612497
ZEXEL 101605-9791 1016059791


Zexel num
Bosch num
Firm num
Name
101605-9791 
9 400 612 497 
  DAEWOO
INJECTION-PUMP ASSEMBLY
DB58TI K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.8 3.75 3.85
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.7
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   93 91.5 94.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   6.7+-0.5
Pump speed r/min   550 550 550
Average injection quantity mm3/st.   19.5 18.2 20.8
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   D
Rack position   9.9++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   75 75 95
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 101605-9791
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Do not adjust boost compensator spring. (4)RACK LIMIT (5)Set idle sub-spring (6)Main spring setting
----------
K=13
----------

Speed control lever angle

Test data 101605-9791
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(2deg)+-5deg b=(15deg)+-5deg

Stop lever angle

Test data 101605-9791
N:Pump normal S:Stop the pump. (1)Use the hole at R = aa (2)Speed = bb, rack position = cc (sealed at delivery) (3)Normal
----------
aa=40mm bb=0r/min cc=1-0.5mm
----------
a=44.5deg+-5deg b=(50deg)

Timing setting

Test data 101605-9791
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=13deg
----------
a=(100deg)




Have questions with 101605-9791?





Group cross 101605-9791 ZEXEL

Dpico 

 
 
INJECTION-PUMP ASSEMBLY
D1146TI
 
 
INJECTION-PUMP ASSEMBLY
DB58T
 
 
INJECTION-PUMP ASSEMBLY
DB58TI

Mitsubishi-Heav 

9 400 612 167 
3436108090 
INJECTION-PUMP ASSEMBLY
S6K
 
3436118090 
INJECTION-PUMP ASSEMBLY
S6K
9 400 612 802 
3436118091 
INJECTION-PUMP ASSEMBLY
S6K

Dpico 

F 019 Z10 987 
 
INJECTION-PUMP ASSEMBLY
DB58T

Mitsubishi-Heav 

 
3436112050 
INJECTION-PUMP ASSEMBLY
S6K-T
9 400 611 328 
3436112051 
INJECTION-PUMP ASSEMBLY
S6K-T
9 400 612 035 
3436113050 
INJECTION-PUMP ASSEMBLY
S6K

Daewoo 

 
 
INJECTION-PUMP ASSEMBLY
DB58TI
101605-9791  
9 400 612 497 
 
INJECTION-PUMP ASSEMBLY
DB58TI
Back to top