101605-3930 ZEXEL 9 400 611 437 BOSCH INJECTION-PUMP ASSEMBLY 9400611437 1016053930 6138721441

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101605-3930 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 437 9400611437

ZEXEL 101605-3930 1016053930

KOMATSU 6138721441 6138721441

Service parts 101605-3930 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-4110

3. GOVERNOR 105419-0360

4. SUPPLY PUMP 105210-4800

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105662-0870

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6000

11. Nozzle and Holder 6138-12-3100

12. Open Pre:MPa(Kqf/cm2) 24.5{250}

13. NOZZLE-HOLDER 105031-4480

14. NOZZLE 105015-5680

15. NOZZLE SET

Include in #1:

101605-3930 as INJECTION-PUMP ASSEMBLY

Include in #2:

104740-6000 as _

104740-6001

104740-6002

Cross reference number

BOSCH 9 400 611 437 9400611437

ZEXEL 101605-3930 1016053930

KOMATSU 6138721441 6138721441

Zexel num

Bosch num

Firm num

Name

101605-3930

9 400 611 437

6138721441 KOMATSU

INJECTION-PUMP ASSEMBLY
SA6D110 K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4 3.95 4.05

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 9.6

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 88.5 87.5 89.5

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point C

Rack position 6.5+-0.5

Pump speed r/min 930 930 930

Average injection quantity mm3/st. 20 18.8 21.2

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Rack difference between N = N1 and N = N2 (4)Set idle sub-spring
----------
K=16 N1=750r/min N2=450r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Pump speed = aa (2)Stopper bolt setting (3)Pump speed = bb (at delivery)
----------
aa=750r/min bb=900r/min
----------
a=5deg+-5deg b=6deg+-5deg c=25deg+-5deg