101605-3940 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016053940 6209711350


101605-3940 INJECTION-PUMP ASSEMBLY
Rating:
83
Buy INJECTION-PUMP ASSEMBLY 101605-3940 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101605-3940 1016053940
KOMATSU 6209711350 6209711350

Service parts 101605-3940 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-3900
3. GOVERNOR 105400-5081
4. SUPPLY PUMP 105220-5420
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-1190
7. COUPLING PLATE 156637-8520
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4551
11. Nozzle and Holder 6207-11-3200
12. Open Pre:MPa(Kqf/cm2) 24.5{250}
13. NOZZLE-HOLDER 105048-3300
14. NOZZLE 105017-0430
15. NOZZLE SET

Include in #1:

101605-3940 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101605-3940 1016053940
KOMATSU 6209711350 6209711350


Zexel num
Bosch num
Firm num
Name
101605-3940 
101605-3941 
 
6209711350  KOMATSU
INJECTION-PUMP ASSEMBLY
6M91A * K 14BE PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.1
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   92.6 91.6 93.6
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   9.1+-0.5
Pump speed r/min   265 265 265
Average injection quantity mm3/st.   8 7 9
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101605-3940
N:Pump speed R:Rack position (mm) (1)Target notch: K
----------
K=5
----------

Speed control lever angle

Test data 101605-3940
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=50deg+-5deg b=25deg+-5deg

Stop lever angle

Test data 101605-3940
N:Pump normal S:Stop the pump.
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101605-3940
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 101605-3940?





Group cross 101605-3940 ZEXEL

Komatsu 

 
6137721621 
INJECTION-PUMP ASSEMBLY
S6D105
 
6138721481 
INJECTION-PUMP ASSEMBLY
S6D110
 
6138721421 
INJECTION-PUMP ASSEMBLY
SA6D110
9 400 611 437 
6138721441 
INJECTION-PUMP ASSEMBLY
SA6D110
101605-3940  

101605-3941 
 
6209711350 
INJECTION-PUMP ASSEMBLY
6M91A
9 400 615 359 
6209711351 
INJECTION-PUMP ASSEMBLY
6M91A-1
9 400 611 438 
6209711360 
INJECTION-PUMP ASSEMBLY
6M95A
9 400 612 113 
6209711361 
INJECTION-PUMP ASSEMBLY
6M95A-2
 
 
INJECTION-PUMP ASSEMBLY
S6D108
9 400 615 360 
6221711810 
INJECTION-PUMP ASSEMBLY
S6D108
F 019 Z10 834 
6137721270 
INJECTION-PUMP ASSEMBLY
S6D105
F 019 Z10 605 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 615 361 
6138721153 
INJECTION-PUMP ASSEMBLY
S6D110
 
6221711310 
INJECTION-PUMP ASSEMBLY
S6D108
9 400 615 362 
6221711311 
INJECTION-PUMP ASSEMBLY
S6D108
Back to top