101605-3890 ZEXEL 9 400 615 358 BOSCH INJECTION-PUMP ASSEMBLY 9400615358 1016053890 6137721661


101605-3890 INJECTION-PUMP ASSEMBLY
Rating:
78
Buy INJECTION-PUMP ASSEMBLY 101605-3890 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 615 358 9400615358
ZEXEL 101605-3890 1016053890
KOMATSU 6137721661 6137721661

Service parts 101605-3890 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-2530
3. GOVERNOR 105419-0310
4. SUPPLY PUMP 105210-4560
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-0371
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5430
11. Nozzle and Holder 6-13612-310-0
12. Open Pre:MPa(Kqf/cm2) 22.1{225}
13. NOZZLE-HOLDER 105031-4480
14. NOZZLE 105015-5020
15. NOZZLE SET

Include in #1:

101605-3890 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 615 358 9400615358
ZEXEL 101605-3890 1016053890
KOMATSU 6137721661 6137721661


Zexel num
Bosch num
Firm num
Name
101605-3890 
9 400 615 358 
6137721661  KOMATSU
INJECTION-PUMP ASSEMBLY
S6D105 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.3 3.25 3.35
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.5
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   104 103 105
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8+-0.5
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   10 8.5 11.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101605-3890
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Idle sub spring setting: L1. (3)Rack difference between N = N1 and N = N2
----------
K=15 L1=6-0.5mm N1=800r/min N2=500r/min
----------

Speed control lever angle

Test data 101605-3890
F:Full speed I:Idle S:Stop (1)Set the pump speed at aa (2)Set speed at bb (setting at shipping). (3)After confirming stopping, set at idling for delivery. (4)Stopper bolt setting
----------
aa=750r/min bb=900r/min
----------
a=(15deg)+-5deg b=32deg+-3deg c=(9deg)+-5deg d=(33deg)+-5deg

Stop lever angle

Test data 101605-3890
N:Pump normal S:Stop the pump. (1)No return spring
----------

----------
a=26.5deg+-5deg b=53deg+-5deg




Have questions with 101605-3890?





Group cross 101605-3890 ZEXEL

Komatsu 

 
6137721161 
INJECTION-PUMP ASSEMBLY
S6D105
 
6137721113 
INJECTION-PUMP ASSEMBLY
S6D105
 
6137721172 
INJECTION-PUMP ASSEMBLY
S6D105
 
6137721261 
INJECTION-PUMP ASSEMBLY
S6D105
 
6137721741 
INJECTION-PUMP ASSEMBLY
S6D105
 
 
INJECTION-PUMP ASSEMBLY
S6D110
 
6209711322 
INJECTION-PUMP ASSEMBLY
SA6D91L
 
6209711332 
INJECTION-PUMP ASSEMBLY
SA6D95L
 
6137721540 
INJECTION-PUMP ASSEMBLY
S6D105
101605-3890  
9 400 615 358 
6137721661 
INJECTION-PUMP ASSEMBLY
S6D105
Back to top