101603-9530 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016039530


101603-9530 INJECTION-PUMP ASSEMBLY
Rating:
33
Buy INJECTION-PUMP ASSEMBLY 101603-9530 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101603-9530 1016039530

Cross reference number

ZEXEL 101603-9530 1016039530


Zexel num
Bosch num
Firm num
Name
101603-9530 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3 2.95 3.05
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.2
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   42 41 43
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   8
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   53 52 54
Max. variation between cylinders %   0 -10 10
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   -
Rack position   7+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   9 7.2 10.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_04
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   80 80
Fixing the lever   *
Remarks
After startup boost setting
 
Timer adjustment
Pump speed r/min   (1140)
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1500
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101603-9530
N:Pump speed R:Rack position (mm) (1)The torque control spring must does not have a set force. (2)Excess fuel setting for starting: SXL (3)Damper spring setting: DL
----------
SXL=10.5-0.2mm DL=6-0.2mm
----------

0000000901

Test data 101603-9530
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=17deg+-5deg b=18.5deg+-3deg

Stop lever angle

Test data 101603-9530
N:Pump normal S:Stop the pump. (1)Use the pin at R = aa (2)Rack position bb
----------
aa=20mm bb=(1.2)mm
----------
a=40deg+-5deg b=71deg+-5deg

Timing setting

Test data 101603-9530
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101603-9530?





Group cross 101603-9530 ZEXEL

Nissan-Diesel 

F 019 Z10 366 
16700Z5677 
INJECTION-PUMP ASSEMBLY
FE6B
 
16713Z5816 
INJECTION-PUMP ASSEMBLY
FE6B
 
16713Z5817 
INJECTION-PUMP ASSEMBLY
FE6B
101603-9530  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 615 299 
16700Z5678 
INJECTION-PUMP ASSEMBLY
FE6A
 
16713Z5819 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 615 300 
16700Z5700 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 615 301 
16700Z5701 
INJECTION-PUMP ASSEMBLY
FE6A
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

F 019 Z20 472 
16713Z5862 
INJECTION-PUMP ASSEMBLY
FE6A
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
16713Z5863 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 615 302 
16713Z5864 
INJECTION-PUMP ASSEMBLY
FE6A
Back to top