101603-9500 ZEXEL F 019 Z10 366 BOSCH INJECTION-PUMP ASSEMBLY f019z10366 1016039500 16700z5677


101603-9500 INJECTION-PUMP ASSEMBLY
Rating:
30
Buy INJECTION-PUMP ASSEMBLY 101603-9500 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 366 f019z10366
ZEXEL 101603-9500 1016039500
NISSAN-DIESEL 16700Z5677 16700z5677

Service parts 101603-9500 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-3910
3. GOVERNOR 105482-7300
4. SUPPLY PUMP 105220-7060
5. AUTOM. ADVANCE MECHANIS 105672-0150
6. COUPLING PLATE 105661-0391
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6690
11. Nozzle and Holder 16600Z5519
12. Open Pre:MPa(Kqf/cm2) 19.6(200)
13. NOZZLE-HOLDER 105031-4650
14. NOZZLE 105015-6380
15. NOZZLE SET

Include in #1:

101603-9500 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH F 019 Z10 366 f019z10366
ZEXEL 101603-9500 1016039500
NISSAN-DIESEL 16700Z5677 16700z5677


Zexel num
Bosch num
Firm num
Name
101603-9500 
101603-9860 
F 019 Z10 366 
16700Z5677  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6B * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-1520
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.8
Pump speed r/min   800 800 800
Each cylinder's injection qty mm3/st.   64.9 63.9 65.9
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7+-0.5
Pump speed r/min   275 275 275
Each cylinder's injection qty mm3/st.   9.6 7.8 11.4
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   9.6
Pump speed r/min   1500 1500 1500
Each cylinder's injection qty mm3/st.   88.4 86.4 90.4
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   D
Rack position   -
Pump speed r/min   100 100 100
Each cylinder's injection qty mm3/st.   82 82
Fixing the lever   *
Remarks
After startup boost setting
 
Timer adjustment
Pump speed r/min   1250--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1200
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   5 4.5 5.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101603-9500
N:Pump speed R:Rack position (mm) (1)Lever ratio: RT (2)Target shim dimension: TH (3)Tolerance for racks not indicated: +-0.05mm. (4)Excess fuel setting for starting: SXL (N = N1) (5)Damper spring setting
----------
RT=1 TH=2.9mm SXL=9.7+-0.1mm N1=500r/min
----------

Speed control lever angle

Test data 101603-9500
F:Full speed
----------

----------
a=25deg+-5deg

0000000901

Test data 101603-9500
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=12deg+-5deg b=21.5deg+-3deg

Stop lever angle

Test data 101603-9500
N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=20mm
----------
a=40deg+-5deg b=71deg+-5deg

Timing setting

Test data 101603-9500
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101603-9500?





Group cross 101603-9500 ZEXEL

Nissan-Diesel 

101603-9500  

101603-9860 
F 019 Z10 366 
16700Z5677 
INJECTION-PUMP ASSEMBLY
FE6B
 
16713Z5816 
INJECTION-PUMP ASSEMBLY
FE6B
 
16713Z5817 
INJECTION-PUMP ASSEMBLY
FE6B
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

9 400 615 299 
16700Z5678 
INJECTION-PUMP ASSEMBLY
FE6A
 
16713Z5819 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 615 300 
16700Z5700 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 615 301 
16700Z5701 
INJECTION-PUMP ASSEMBLY
FE6A
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

F 019 Z20 472 
16713Z5862 
INJECTION-PUMP ASSEMBLY
FE6A
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
16713Z5863 
INJECTION-PUMP ASSEMBLY
FE6A
9 400 615 302 
16713Z5864 
INJECTION-PUMP ASSEMBLY
FE6A
Back to top