101602-7481 ZEXEL 9 400 614 899 BOSCH INJECTION-PUMP ASSEMBLY 9400614899 1016027481 1156027951

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101602-7481 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 899 9400614899

ZEXEL 101602-7481 1016027481

ISUZU 1156027951 1156027951

Service parts 101602-7481 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-6090

3. GOVERNOR 105419-0870

4. SUPPLY PUMP

105220-7440

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105661-3230

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-6682

11. Nozzle and Holder 1-15300-291-2

12. Open Pre:MPa(Kqf/cm2) 14.7(150)

13. NOZZLE-HOLDER 105030-4361

14. NOZZLE

105015-4740

15. NOZZLE SET

Include in #1:

101602-7481 as INJECTION-PUMP ASSEMBLY

Include in #2:

104748-1010 as _

Cross reference number

BOSCH 9 400 614 899 9400614899

ZEXEL 101602-7481 1016027481

ISUZU 1156027951 1156027951

Zexel num

Bosch num

Firm num

Name

101602-7481

9 400 614 899

1156027951 ISUZU

INJECTION-PUMP ASSEMBLY
6BG1 K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-4920

Overflow valve opening pressure kPa 127 107 147

Overflow valve opening pressure kgf/cm2 1.3 1.1 1.5

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.6 3.55 3.65

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 8.8

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 78.5 77.5 79.5

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point -

Rack position 6.5+-0.5

Pump speed r/min 425 425 425

Average injection quantity mm3/st. 9.4 8.1 10.7

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)The torque control spring does not operate. (3)Set idle sub-spring (4)Main spring setting
----------
K=18
----------

Speed control lever angle

F:Full speed I:Idle (1)Set the stopper bolt (fixed at idle at delivery).
----------

----------
a=(13deg)+-5deg b=(22deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=38deg+-5deg b=46deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of pump side coupling's threaded hole at No. 1 cylinder's beginning of injection. (3)B.T.D.C.: aa (4)-
----------
aa=20deg
----------
a=(10deg)