101602-3510 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016023510 6136721610

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101602-3510 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101602-3510 1016023510

KOMATSU 6136721610 6136721610

Service parts 101602-3510 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-2530

3. GOVERNOR 105410-7270

4. SUPPLY PUMP 105210-4560

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105661-0371

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-5870

11. Nozzle and Holder 6136-12-3200

12. Open Pre:MPa(Kqf/cm2) 22.1{225}

13. NOZZLE-HOLDER 105031-4480

14. NOZZLE 105015-5470

15. NOZZLE SET

Include in #1:

101402-4760 as _

101602-3510 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101602-3510 1016023510

KOMATSU 6136721610 6136721610

Zexel num

Bosch num

Firm num

Name

101602-3510

6136721610 KOMATSU

INJECTION-PUMP ASSEMBLY
6D105 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.3 3.25 3.35

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 9.5

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 61.5 60.5 62.5

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 8+-0.5

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 10.9 9.4 12.4

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Rack difference between N = N1 and N = N2 (3)Idle sub spring setting: L1.
----------
K=15 N1=800r/min N2=500r/min L1=5.8-0.5mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Speed set at aa (setting at shipping) (2)Stopper bolt setting (3)Set the pump speed at bb.
----------
aa=900r/min bb=750r/min
----------
a=35deg+-5deg b=17deg+-5deg c=9deg+-5deg