Fuel injectors
  1. Home
  2. injection
  3. #1016020110

101602-0110 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016020110 5156006201


101602-0110 INJECTION-PUMP ASSEMBLY
Rating:
23
Buy INJECTION-PUMP ASSEMBLY 101602-0110 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101602-0110 1016020110
ISUZU 5156006201 5156006201

Cross reference number

ZEXEL 101602-0110 1016020110
ISUZU 5156006201 5156006201


Zexel num
Bosch num
Firm num
Name
101602-0110 
101602-0190 
 
5156006201  ISUZU
INJECTION-PUMP ASSEMBLY
6BD1 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105101-4970
Nozzle   105015-3600
Bosch type code   9 432 610 405
Nozzle holder   105031-3470
Opening pressure MPa   18.1
Opening pressure kgf/cm2   185
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-380
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.5 3.45 3.55
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.8
Pump speed r/min   1350 1350 1350
Average injection quantity mm3/st.   65 63.5 66.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.1+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   9.4 8.1 10.7
Max. variation between cylinders %   0 -14 14
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101602-0110
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)At rack cap installation: R1 (3)Set idle sub-spring (4)Main spring setting
----------
K=9 R1=(17.5)mm
----------

Speed control lever angle

Test data 101602-0110
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=34deg+-5deg




Have questions with 101602-0110?





Group cross 101602-0110 ZEXEL

Isuzu 

101602-0100  

101602-0160 
 
5156006320 

101602-0110  

101602-0190 
 
5156006201 
INJECTION-PUMP ASSEMBLY
6BD1
101602-0120  

101602-0150 
 
5156006710 
INJECTION-PUMP ASSEMBLY
6BB1
101602-0130  
 
 
INJECTION-PUMP ASSEMBLY
12PA1
101602-0140  
 
 

12PB1
101602-0150  
 
5156006715 
INJECTION-PUMP ASSEMBLY
6BB1
101602-0160  
 
5156006325 
INJECTION-PUMP ASSEMBLY
6BB1
101602-0170  
 
5156006162 
INJECTION-PUMP ASSEMBLY
6BB1
101602-0180  
 
5156005772 

6BD1
101602-0190  

101602-0430 
 
5156006203 
INJECTION-PUMP ASSEMBLY
6BD1
Back to top