101601-5860 ZEXEL 9 400 614 632 BOSCH INJECTION-PUMP ASSEMBLY 9400614632 1016015860 220203800a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101601-5860 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 632 9400614632

ZEXEL 101601-5860 1016015860

HINO 220203800A 220203800a

Service parts 101601-5860 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-5100

3. GOVERNOR 105400-7380

4. SUPPLY PUMP 105210-5230

5. AUTOM. ADVANCE MECHANIS 105614-3510

6. COUPLING PLATE 105662-1280

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-6280

11. Nozzle and Holder 23600-2133

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105030-4300

14. NOZZLE

105015-8590

15. NOZZLE SET

Include in #1:

101601-5860 as INJECTION-PUMP ASSEMBLY

Include in #2:

104139-4001 as _

Cross reference number

BOSCH 9 400 614 632 9400614632

ZEXEL 101601-5860 1016015860

HINO 220203800A 220203800a

Zexel num

Bosch num

Firm num

Name

101601-5860
101602-2670

9 400 614 632

220203800A HINO

INJECTION-PUMP ASSEMBLY
H07C-T * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 134424-0920

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.8 3.77 3.83

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.75 60.25

Difference between angles 2
Cyl.1-2 deg. 120 119.75 120.25

Difference between angles 3
Cal 1-6 deg. 180 179.75 180.25

Difference between angles 4
Cal 1-3 deg. 240 239.75 240.25

Difference between angles 5
Cal 1-5 deg. 300 299.75 300.25

Injection quantity adjustment

Adjusting point A

Rack position 9.5

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 98.4 96.4 100.4

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point -

Rack position 6.1+-0.5

Pump speed r/min 650 650 650

Average injection quantity mm3/st. 10 9 11

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Timer adjustment

Pump speed r/min 925--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 875

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1250

Advance angle deg. 3.5 3 4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)SMA RACK LIMIT; RAL (3)Set idle sub-spring (4)Main spring setting (5)Perform governor adjustment at an ambient temperature of at least 15 deg C (rack limit spring is shape memory alloy).
----------
K=12 RAL=9.7+0.2mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=10deg+-5deg b=18deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Rack position aa or less, pump speed bb (2)At shipping (3)Contacts normal side pin (4)Clearance from the pin on the normal side: cc
----------
aa=5.1mm bb=0r/min cc=2.5+-0.5mm
----------
a=53deg+-5deg b=51deg+-5deg c=(6deg)