101502-9030 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1015029030

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101502-9030 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101502-9030 1015029030

Service parts 101502-9030 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101050-8050

3. GOVERNOR 105419-0650

4. SUPPLY PUMP 105220-5480

5. AUTOM. ADVANCE MECHANIS 105621-0430

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-7370

11. Nozzle and Holder 157-0753-001

12. Open Pre:MPa(Kqf/cm2) 15.7{160}/22.1{225}

13. NOZZLE-HOLDER 105031-4990

14. NOZZLE 105015-7140

15. NOZZLE SET

Include in #1:

101502-9030 as INJECTION-PUMP ASSEMBLY

101695-3750 as _

101695-3751

Cross reference number

ZEXEL 101502-9030 1015029030

Zexel num

Bosch num

Firm num

Name

101502-9030

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-4320

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-3-5-4- 2

Pre-stroke mm 3.6 3.55 3.65

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 72 71.5 72.5

Difference between angles 2
Cal 1-5 deg. 144 143.5 144.5

Difference between angles 3
Cal 1-4 deg. 216 215.5 216.5

Difference between angles 4
Cyl.1-2 deg. 288 287.5 288.5

Injection quantity adjustment

Adjusting point A

Rack position 10

Pump speed r/min 1200 1200 1200

Average injection quantity mm3/st. 72.8 71.3 74.3

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 7.3+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 10 8 12

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Set idle sub-spring (3)Main spring setting (4)The torque control spring must does not have a set force. (5)Rack difference between N = N1 and N = N2
----------
K=14 N1=1200r/min N2=600r/min
----------