Fuel injectors
  1. Home
  2. injection
  3. #1015029035

101502-9035 ZEXEL 9 400 614 555 BOSCH INJECTION-PUMP ASSEMBLY 9400614555 1015029035 1655051014


101502-9035 INJECTION-PUMP ASSEMBLY
Rating:
29
Buy INJECTION-PUMP ASSEMBLY 101502-9035 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 614 555 9400614555
ZEXEL 101502-9035 1015029035
KUBOTA 1655051014 1655051014

Service parts 101502-9035 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101050-8073
3. GOVERNOR 105419-0761
4. SUPPLY PUMP 105220-5480
5. AUTOM. ADVANCE MECHANIS 105621-0430
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-7370
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 15.7(160)/22.1(225)
13. NOZZLE-HOLDER 105031-4990
14. NOZZLE 105015-7140
15. NOZZLE SET

Include in #1:

101502-9035 as INJECTION-PUMP ASSEMBLY
101695-3451 as _

Cross reference number

BOSCH 9 400 614 555 9400614555
ZEXEL 101502-9035 1015029035
KUBOTA 1655051014 1655051014


Zexel num
Bosch num
Firm num
Name
101502-9035 
9 400 614 555 
1655051014  KUBOTA
INJECTION-PUMP ASSEMBLY
F5402 K 14BY PE5A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   131425-2420
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-3-5-4- 2
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-3 deg.   72 71.5 72.5
Difference between angles 2
Cal 1-5 deg.   144 143.5 144.5
Difference between angles 3
Cal 1-4 deg.   216 215.5 216.5
Difference between angles 4
Cyl.1-2 deg.   288 287.5 288.5
Injection quantity adjustment
Adjusting point   A
Rack position   10
Pump speed r/min   1200 1200 1200
Average injection quantity mm3/st.   72.8 71.3 74.3
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.3+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   10 8 12
Max. variation between cylinders %   0 -15 15
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 101502-9035
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)Main spring setting (5)Rack difference from N = N1
----------
K=14 N1=1200r/min
----------

Speed control lever angle

Test data 101502-9035
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(20deg)+-5deg b=(36deg)+-5deg

Stop lever angle

Test data 101502-9035
N:Pump normal S:Stop the pump. (1)Normal (2)Use the pin at R = aa
----------
aa=35mm
----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 101502-9035
(1)Pump vertical direction (2)Position of camshaft's key groove at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(120deg)




Have questions with 101502-9035?





Group cross 101502-9035 ZEXEL

101502-9030  
 
 
INJECTION-PUMP ASSEMBLY

Kubota 

101502-9031  

101502-9032 
 
1655051011 
INJECTION-PUMP ASSEMBLY
F5402
101502-9032  

101502-9033 
 
1655051012 
INJECTION-PUMP ASSEMBLY
F5402
101502-9033  

101502-9034 
 
1655051013 
INJECTION-PUMP ASSEMBLY
F5402
101502-9034  

101502-9035 
F 019 Z10 588 
 
INJECTION-PUMP ASSEMBLY

Kubota 

101502-9035  
9 400 614 555 
1655051014 
INJECTION-PUMP ASSEMBLY
F5402
Back to top