101482-9210 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014829210 1679090362

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101482-9210 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101482-9210 1014829210

NISSAN-DIESEL 1679090362 1679090362

Service parts 101482-9210 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101048-8160

3. GOVERNOR 105419-1480

4. SUPPLY PUMP 105220-5740

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156638-6020

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-5780

11. Nozzle and Holder 16600-90074

12. Open Pre:MPa(Kqf/cm2) 15.7{160}

13. NOZZLE-HOLDER 105048-3390

14. NOZZLE

105017-0900

15. NOZZLE SET

Include in #1:

101482-9210 as INJECTION-PUMP ASSEMBLY

Include in #2:

104742-1360 as _

Cross reference number

ZEXEL 101482-9210 1014829210

NISSAN-DIESEL 1679090362 1679090362

Zexel num

Bosch num

Firm num

Name

101482-9210
101482-9211

1679090362 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
BD30 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 10.4

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 46.1 45.1 47.1

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point D

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 61 61 71

Fixing the lever *

Rack limit *

Injection quantity adjustment_03

Adjusting point -

Rack position 9.2+-0.5

Pump speed r/min 425 425 425

Average injection quantity mm3/st. 8 6 10

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Main spring setting (5)Set idle sub-spring (6)Rack difference between N = N1 and N = N2
----------
K=13 N1=1200r/min N2=800r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=11deg+-5deg b=19deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=12deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Maximum no-load speed (r/min) LABEL9:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)At high idle rack position L
----------
L=8.1mm
----------
a1=B a2=- a3=- a4=- a5=- a6=- r1=800r/min r2=- r3=- r4=- r5=- r6=- Q1=46.1+-1mm3/st Q2=- Q3=- Q4=- Q5=- Q6=- c1=+-3.5% c2=- c3=- c4=- c5=- c6=- a7=26 a8=25 a9=24 a10=23 a11=22 a12=21 a13=20 a14=19 a15=18 a16=17 a17=16 a18=15 a19=14 a20=- a21=- a22=- a23=- a24=- a25=- a26=- a27=- a28=- r7=1300r/min r8=1250r/min r9=1200r/min r10=1150r/min r11=1100r/min r12=1050r/min r13=1000r/min r14=950r/min r15=900r/min r16=850r/min r17=800r/min r18=750r/min r19=700r/min r20=- r21=- r22=- r23=- r24=- r25=- r26=- r27=- r28=- R7=1395+-32r/min R8=1340+-31r/min R9=1290+-30r/min R10=1235+-28r/min R11=1180+-27r/min R12=1130+-26r/min R13=1075+-25r/min R14=1020+-23r/min R15=965+-22r/min R16=915+-22r/min R17=860+-20r/min R18=815+-18r/min R19=770+-18r/min R20=- R21=- R22=- R23=- R24=- R25=- R26=- R27=- R28=-