101482-9131 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014829131 1679090313

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101482-9131 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101482-9131 1014829131

NISSAN-DIESEL 1679090313 1679090313

Cross reference number

ZEXEL 101482-9131 1014829131

NISSAN-DIESEL 1679090313 1679090313

Zexel num

Bosch num

Firm num

Name

101482-9131

1679090313 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
FD35T04 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-3-4-2

Pre-stroke mm 2.8 2.75 2.85

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 10

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 67.2 66.2 68.2

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point -

Rack position 7.8+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 10 8 12

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.

Injection quantity adjustment_03

Adjusting point C

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 81 81 91

Fixing the lever *

Rack limit *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
K=10
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=(16deg)+-5deg b=(36deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Maximum no-load speed (r/min) LABEL9:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)At high idle rack position L
----------
L=5.5mm
----------
a1=A a2=B a3=C a4=- r1=- r2=1100r/min r3=- r4=- Q1=- Q2=67.2+-1mm3/st Q3=- Q4=- c1=- c2=+-3.5% c3=- c4=- a5=25 a6=24 a7=23 a8=22 a9=21 a10=20 a11=19 a12=18 a13=17 a14=16 a15=15 r5=1250r/min r6=1200r/min r7=1150r/min r8=1100r/min r9=1050r/min r10=1000r/min r11=950r/min r12=900r/min r13=850r/min r14=800r/min r15=750r/min R5=1340+-31r/min R6=1290+-30r/min R7=1235+-28r/min R8=1180+-27r/min R9=1130+-26r/min R10=1075+-25r/min R11=1040+-24r/min R12=995+-22r/min R13=950+-20r/min R14=905+-20r/min R15=860+-18r/min

Timing setting

(1)Pump vertical direction (2)Position of gear's standard threaded hole (position of gear mark 'P') at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(60deg)