101481-9072 ZEXEL F 019 Z10 017 BOSCH INJECTION-PUMP ASSEMBLY f019z10017 1014819072 16700s9403


101481-9072 INJECTION-PUMP ASSEMBLY
Rating:
36
Buy INJECTION-PUMP ASSEMBLY 101481-9072 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 019 Z10 017 f019z10017
ZEXEL 101481-9072 1014819072
NISSAN-DIESEL 16700S9403 16700s9403

Service parts 101481-9072 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101048-9020
3. GOVERNOR 105921-0931
4. SUPPLY PUMP 105220-4840
5. AUTOM. ADVANCE MECHANIS 105670-0110
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5460
11. Nozzle and Holder 16600-T9300
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-4290
14. NOZZLE 105015-6490
15. NOZZLE SET

Include in #1:

101481-9072 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 019 Z10 017 f019z10017
ZEXEL 101481-9072 1014819072
NISSAN-DIESEL 16700S9403 16700s9403


Zexel num
Bosch num
Firm num
Name
101481-9072 
F 019 Z10 017 
16700S9403  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FD33T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   2.8 2.75 2.85
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   10.4
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   70.4 68.8 72
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   8.6+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   10 8 12
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(10.4)
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   70.4 69.4 71.4
Basic   *
Fixing the lever   *
Boost pressure kPa   66.7 66.7
Boost pressure mmHg   500 500
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(10.4)
Pump speed r/min   1800 1800 1800
Average injection quantity mm3/st.   78.2 74.2 82.2
Fixing the lever   *
Boost pressure kPa   66.7 66.7
Boost pressure mmHg   500 500
Boost compensator adjustment
Pump speed r/min   1100 1100 1100
Rack position   R1-1.8
Boost pressure kPa   16 16 16
Boost pressure mmHg   120 120 120
Boost compensator adjustment_02
Pump speed r/min   1100 1100 1100
Rack position   R1-1
Boost pressure kPa   32 30.7 33.3
Boost pressure mmHg   240 230 250
Boost compensator adjustment_03
Pump speed r/min   1100 1100 1100
Rack position   R1(10.4)
Boost pressure kPa   60 53.3 60
Boost pressure mmHg   450 400 450
Timer adjustment
Pump speed r/min   1350--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1300
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1600
Advance angle deg.   1.8 1.3 2.3
Timer adjustment_04
Pump speed r/min   1800
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101481-9072
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)RACK LIMIT: RAL (3)Boost compensator stroke: BCL
----------
T1=A84 RAL=13.2+0.2mm BCL=1.8+-0.1mm
----------

Speed control lever angle

Test data 101481-9072
F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=60deg+-5deg b=(35deg)+-3deg

Stop lever angle

Test data 101481-9072
N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=12mm
----------
a=0deg+-5deg b=40deg+-5deg

Timing setting

Test data 101481-9072
(1)Pump vertical direction (2)Position of gear's standard threaded hole at No 1 cylinder's beginning of injection (position of gear's 'M' mark) (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(60deg)




Have questions with 101481-9072?





Group cross 101481-9072 ZEXEL

Daewoo 

 
 
INJECTION-PUMP ASSEMBLY
4BB1

Nissan-Diesel 

 
16700T9300 
INJECTION-PUMP ASSEMBLY
FD33T
 
16700T9301 

FD33T
 
16700T9302 

FD33T
 
16700S9401 
INJECTION-PUMP ASSEMBLY
FD33T
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

 
1679090175 
INJECTION-PUMP ASSEMBLY
FD33T04
 
1671290111 
INJECTION-PUMP ASSEMBLY
FD33T
 
16700S9402 
INJECTION-PUMP ASSEMBLY
FD33T
 
 
INJECTION-PUMP ASSEMBLY
FD33T
 
 
INJECTION-PUMP ASSEMBLY
FD33T
101481-9072  
F 019 Z10 017 
16700S9403 
INJECTION-PUMP ASSEMBLY
FD33T
 
 
INJECTION-PUMP ASSEMBLY
FD33T
 
16700T9308 
INJECTION-PUMP ASSEMBLY
FD33T
 
16700T9303 
INJECTION-PUMP ASSEMBLY
FD33T
Back to top