101433-9390 ZEXEL 9 400 610 007 BOSCH INJECTION-PUMP ASSEMBLY 9400610007 1014339390 16700l2000


101433-9390 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 101433-9390 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 007 9400610007
ZEXEL 101433-9390 1014339390
NISSAN-DIESEL 16700L2000 16700l2000

Service parts 101433-9390 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101043-8490
3. GOVERNOR 105520-3150
4. SUPPLY PUMP 105220-5001
5. AUTOM. ADVANCE MECHANIS 105622-0850
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-1800
11. Nozzle and Holder 16600-90019
12. Open Pre:MPa(Kqf/cm2) 9.8{100}
13. NOZZLE-HOLDER 105071-1240
14. NOZZLE 105000-1010
15. NOZZLE SET

Include in #1:

101433-9390 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 610 007 9400610007
ZEXEL 101433-9390 1014339390
NISSAN-DIESEL 16700L2000 16700l2000


Zexel num
Bosch num
Firm num
Name
101433-9390 
9 400 610 007 
16700L2000  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
SD25 K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   2.3 2.25 2.35
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   -
Rack position   14.8
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   35.3 34.3 36.3
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the rack   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   10.6+-0. 5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   7.5 6.4 8.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Timer adjustment
Pump speed r/min   500
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   0.8 0.3 1.3
Timer adjustment_03
Pump speed r/min   900
Advance angle deg.   1.6 1.1 2.1
Timer adjustment_04
Pump speed r/min   1150
Advance angle deg.   2.9 2.4 3.4
Timer adjustment_05
Pump speed r/min   -
Advance angle deg.   5 5 5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101433-9390
R:Rack position (mm) P:Negative pressure (1)Pneumatic governor
----------

----------

Speed control lever angle

Test data 101433-9390
N:Normal B:When boosted S:Stop (1)Rack position = approximately aa. (2)Rack position corresponding to bb
----------
aa=(1.8)mm bb=17.5mm
----------
a=4deg+-5deg b=26deg+-3deg c=5deg+-5deg

Timing setting

Test data 101433-9390
(1)Pump vertical direction (2)Position of gear mark 'Y' at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(130deg)




Have questions with 101433-9390?





Group cross 101433-9390 ZEXEL

Nissan-Diesel 

 
1680090001 
INJECTION-PUMP ASSEMBLY
SD22
 
1671290063 
INJECTION-PUMP ASSEMBLY
SD22
 
1671290065 
INJECTION-PUMP ASSEMBLY
SD22
 
1670037W00 
INJECTION-PUMP ASSEMBLY
SD22
 
1670036W01 
INJECTION-PUMP ASSEMBLY
SD22
 
1670037W01 
INJECTION-PUMP ASSEMBLY
SD22
 
1670037W02 
INJECTION-PUMP ASSEMBLY
SD22
 
1670037W03 
INJECTION-PUMP ASSEMBLY
SD22
9 400 614 124 
1670037W04 
INJECTION-PUMP ASSEMBLY
SD22
 
1679090068 
INJECTION-PUMP ASSEMBLY
SD22
 
16700V0607 
INJECTION-PUMP ASSEMBLY
SD22
 
1679090070 
INJECTION-PUMP ASSEMBLY
SD22
101433-9390  
9 400 610 007 
16700L2000 
INJECTION-PUMP ASSEMBLY
SD25
Back to top