101433-9380 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1014339380 1679090070


101433-9380 INJECTION-PUMP ASSEMBLY
Rating:
24
Buy INJECTION-PUMP ASSEMBLY 101433-9380 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101433-9380 1014339380
NISSAN-DIESEL 1679090070 1679090070

Service parts 101433-9380 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101043-8620
3. GOVERNOR 105410-5070
4. SUPPLY PUMP 105220-4950
5. AUTOM. ADVANCE MECHANIS 105622-0240
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-1800
11. Nozzle and Holder 16600-90019
12. Open Pre:MPa(Kqf/cm2) 9.8{100}
13. NOZZLE-HOLDER 105071-1240
14. NOZZLE 105000-1010
15. NOZZLE SET

Include in #1:

101433-9380 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

ZEXEL 101433-9380 1014339380
NISSAN-DIESEL 1679090070 1679090070


Zexel num
Bosch num
Firm num
Name
101433-9380 
 
1679090070  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
SD22 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   2.3 2.25 2.35
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   B
Rack position   11.1
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   33.8 32.8 34.8
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   D
Rack position   7.7+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   7.5 6.4 8.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Timer adjustment
Pump speed r/min   500
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   550
Advance angle deg.   0.7
Timer adjustment_03
Pump speed r/min   700
Advance angle deg.   1 0.5 1.5
Timer adjustment_04
Pump speed r/min   900
Advance angle deg.   2 1.5 2.5
Timer adjustment_05
Pump speed r/min   1100
Advance angle deg.   3 2.5 3.5
Timer adjustment_06
Pump speed r/min   1200
Advance angle deg.   3.5 3 4
Timer adjustment_07
Pump speed r/min   -
Advance angle deg.   5 5 5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101433-9380
N:Pump speed R:Rack position (mm) (1)Target notch: K
----------
K=17
----------

Speed control lever angle

Test data 101433-9380
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=13deg+-5deg b=32deg+-5deg

Stop lever angle

Test data 101433-9380
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=34deg+-5deg

Timing setting

Test data 101433-9380
(1)Pump vertical direction (2)Position of gear mark 'Y' at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(130deg)




Have questions with 101433-9380?





Group cross 101433-9380 ZEXEL

Nissan-Diesel 

 
1680090001 
INJECTION-PUMP ASSEMBLY
SD22
 
1671290063 
INJECTION-PUMP ASSEMBLY
SD22
 
1671290065 
INJECTION-PUMP ASSEMBLY
SD22
 
1670037W00 
INJECTION-PUMP ASSEMBLY
SD22
 
1670036W01 
INJECTION-PUMP ASSEMBLY
SD22
 
1670037W01 
INJECTION-PUMP ASSEMBLY
SD22
 
1670037W02 
INJECTION-PUMP ASSEMBLY
SD22
 
1670037W03 
INJECTION-PUMP ASSEMBLY
SD22
9 400 614 124 
1670037W04 
INJECTION-PUMP ASSEMBLY
SD22
 
1679090068 
INJECTION-PUMP ASSEMBLY
SD22
 
16700V0607 
INJECTION-PUMP ASSEMBLY
SD22
101433-9380  
 
1679090070 
INJECTION-PUMP ASSEMBLY
SD22
9 400 610 007 
16700L2000 
INJECTION-PUMP ASSEMBLY
SD25
Back to top