101431-0620 ZEXEL 9 400 610 114 BOSCH INJECTION-PUMP ASSEMBLY 9400610114 1014310620 5156010292

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101431-0620 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 114 9400610114

ZEXEL 101431-0620 1014310620

ISUZU 5156010292 5156010292

Service parts 101431-0620 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101043-9160

3. GOVERNOR 105542-6700

4. SUPPLY PUMP 105220-4742

5. AUTOM. ADVANCE MECHANIS 105621-0370

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105151-1451

11. Nozzle and Holder 5-15300-039-1

12. Open Pre:MPa(Kqf/cm2) 11.8{120}

13. NOZZLE-HOLDER 105081-3141

14. NOZZLE

105000-1650

15. NOZZLE SET

Include in #1:

101431-0620 as INJECTION-PUMP ASSEMBLY

106671-4740 as _

Cross reference number

BOSCH 9 400 610 114 9400610114

ZEXEL 101431-0620 1014310620

ISUZU 5156010292 5156010292

Zexel num

Bosch num

Firm num

Name

101431-0620
101432-0940

9 400 610 114

5156010292 ISUZU

INJECTION-PUMP ASSEMBLY
C240 * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-3-4-2

Pre-stroke mm 2.25 2.2 2.3

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 11

Pump speed r/min 1450 1450 1450

Average injection quantity mm3/st. 37.7 36.7 38.7

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 11

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 30.7 29.3 32.1

Max. variation between cylinders % 0 -4.5 4.5

Fixing the rack *

Injection quantity adjustment_03

Adjusting point C

Rack position 11.7

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 34.7 33 36.4

Max. variation between cylinders % 0 -4.5 4.5

Fixing the rack *

Injection quantity adjustment_04

Adjusting point D

Rack position 7.4+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 8 6.9 9.1

Max. variation between cylinders % 0 -14 14

Fixing the rack *

Timer adjustment

Pump speed r/min 500+-50

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 800

Advance angle deg. 1 0.5 1.5

Timer adjustment_03

Pump speed r/min 1050

Advance angle deg. 2 1.2 2.7

Timer adjustment_04

Pump speed r/min 1500

Advance angle deg. 4.5 3.9 4.9

Timer adjustment_05

Pump speed r/min 1750

Advance angle deg. 6 5.5 6.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) P:Negative pressure (1)Pneumatic governor (2)Mechanical governor (3)Acting negative pressure: P1 (4)Injection quantity Q = Q1 or less
----------
Q1=3mm3/st
----------

Stop lever angle

S:Stop the pump. (1)Rack position = at least aa
----------
aa=17.5mm
----------
a=(14deg) b=(23deg)

Timing setting

(1)Pump vertical direction (2)Gear mark Z for the No. 4 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=14deg
----------
a=(60deg)