Buy 101402-7663 ZEXEL 9 400 612 199 BOSCH INJECTION-PUMP ASSEMBLY 9400612199 1014027663 8972389773

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101402-7663 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 199 9400612199

ZEXEL 101402-7663 1014027663

ISUZU 8972389773 8972389773

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Solarhome New Fuel Injection Pump 8972389773 101041-9571 8-97238977-4 Compatible With Isuzu 4JG1T 4JG1 CTL70 Engine & Gehl Skid Steer Loader CTL70

$1,395.00

24 Aug 2024

CN: Bluesun Solar

Solarhome New Fuel Injection Pump 8972389773 101041-9571 8-97238977-4 Compatible With Isuzu 4JG1T 4JG1 CTL70 Engine & Gehl Skid Steer Loader CTL70
Solarhome Part Name: New Fuel Injection Pump || Part Number: 101041-9571, 1010419571, 8980220390, F 01G 29M 013, F01G29M013, 101041-9570,1010419570, 897238-9773, 8972389773, 8-98022039-0, 8972389774, 8-97238977-4 || Application Models: Compatible With Isuzu 4JG1T 4JG1 CTL70 Engine || Compatible With Gehl Skid Steer Loader CTL70 || Package Include: 1X Fuel Injection Pump,8972389773,101041-9571

Service parts 101402-7663 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101041-9510

3. GOVERNOR 105400-9192

4. SUPPLY PUMP 105220-6650

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156643-3520

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105118-6811

11. Nozzle and Holder 8-97238-978-0

12. Open Pre:MPa(Kqf/cm2) 18.1{185}

13. NOZZLE-HOLDER 105048-3230

14. NOZZLE 105017-2880

15. NOZZLE SET

Include in #1:

101402-7663 as INJECTION-PUMP ASSEMBLY

106671-7170 as _

Cross reference number

BOSCH 9 400 612 199 9400612199

ZEXEL 101402-7663 1014027663

ISUZU 8972389773 8972389773

Zexel num

Bosch num

Firm num

Name

101402-7663

9 400 612 199

8972389773 ISUZU

INJECTION-PUMP ASSEMBLY
4JG1-T K 14BC INJECTION PUMP ASSY PE4A,5A, PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-0820

Overflow valve opening pressure kPa 127 107 147

Overflow valve opening pressure kgf/cm2 1.3 1.1 1.5

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-3-4-2

Pre-stroke mm 3.5 3.45 3.55

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-3 deg. 90 89.5 90.5

Difference between angles 2
Cal 1-4 deg. 180 179.5 180.5

Difference between angles 3
Cyl.1-2 deg. 270 269.5 270.5

Injection quantity adjustment

Adjusting point A

Rack position 9.5

Pump speed r/min 1075 1075 1075

Average injection quantity mm3/st. 73.5 72.5 74.5

Max. variation between cylinders % 0 -2.5 2.5

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point C

Rack position 6+-0.5

Pump speed r/min 485 485 485

Average injection quantity mm3/st. 10 8 12

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)Set idle sub-spring (4)Main spring setting (5)Rack difference between N = N1 and N = N2
----------
K=13 N1=1075r/min N2=900r/min
----------

Speed control lever angle

F:Full speed I:Idle S:Stop
----------

----------
a=3deg+-5deg b=19deg+-5deg c=31deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=3.5deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of gear mark 'W' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=6deg
----------
a=(210deg)