101402-7630 ZEXEL 9 400 611 175 BOSCH INJECTION-PUMP ASSEMBLY 9400611175 1014027630 8972278280


101402-7630 INJECTION-PUMP ASSEMBLY
Rating:
47
Buy INJECTION-PUMP ASSEMBLY 101402-7630 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 611 175 9400611175
ZEXEL 101402-7630 1014027630
ISUZU 8972278280 8972278280

Service parts 101402-7630 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101041-8890
3. GOVERNOR 105964-0020
4. SUPPLY PUMP 105220-6250
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE 156638-8420
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105160-5130
11. Nozzle and Holder 8-97222-170-0
12. Open Pre:MPa(Kqf/cm2) 18.1{185}
13. NOZZLE-HOLDER 105030-4750
14. NOZZLE 105025-3040
15. NOZZLE SET

Include in #1:

101402-7630 as INJECTION-PUMP ASSEMBLY

Include in #2:

Cross reference number

BOSCH 9 400 611 175 9400611175
ZEXEL 101402-7630 1014027630
ISUZU 8972278280 8972278280


Zexel num
Bosch num
Firm num
Name
101402-7630 
101402-7631 
9 400 611 175 
8972278280  ISUZU
INJECTION-PUMP ASSEMBLY
4BG1-T * K 14BC PE4A,5A, PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   131424-4920
Overflow valve opening pressure kPa   127 107 147
Overflow valve opening pressure kgf/cm2   1.3 1.1 1.5
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
RED4 control unit part number   407915-0 590
RED4 rack sensor specifications mm   19
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-3-4-2
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2
deg.   270 269.5 270.5
Injection quantity adjustment
Rack position   (7.7)
PWM %   31.4
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   70.5 69.4 71.6
Max. variation between cylinders %   0 -2 2
Basic   *
Injection quantity adjustment_02
Rack position   (5.8)
PWM %   20.9+-2. 8
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   11 9.6 12.4
Max. variation between cylinders %   0 -14 14
Injection quantity adjustment_03
Rack position   (10.2)
PWM %   (45.6)
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   125 120 130
Rack limit   *

Test data Ex:

Speed control lever angle

Test data 101402-7630
N:Pump normal S:Stop the pump. (1)Rack position = aa (2)Rack position bb
----------
aa=20mm bb=1mm
----------
a=27deg+-5deg b=37deg+-5deg

0000000901

Test data 101402-7630
(1)Pump vertical direction (2)Position of gear mark 'CC' at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=9deg
----------
a=(100deg)

Stop lever angle

Test data 101402-7630
(PWM) Pulse width modulation (%) (R) Rack position (mm) Rack sensor output characteristics 1. Rack limit adjustment (1)Measure the rack position R2 for PWM a2%. (2)Confirm that it is within the range R2 = 15+-1 mm. (3)Measure the rack position R1 at PWM a %. (4)Confirm that it is within the range R2 - R1 = 10+-0.1 mm. 2. Check the limp home operation. (1)Move the switch box's limp home switch to the limp home side. (2)Confirm rack position L1 (mm ) and L2 (mm) for PWM in the above table. 3. Check the pull down operation. (1)Confirm that the rack position is 19 mm at PWM B%. (2)In the conditions described in the above table, move the switch box's pull down switch to the pull down side and confirm that the rack position momentarily becomes 1 mm or less.
----------
a1=16.25% a2=72.5% L1=1--mm L2=19++mm A=5 % B=95%
----------




Have questions with 101402-7630?





Group cross 101402-7630 ZEXEL

Isuzu 

9 400 611 577 
8972286040 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 613 976 
8972289970 
INJECTION-PUMP ASSEMBLY
4BG1
9 400 611 313 
8972290010 
INJECTION-PUMP ASSEMBLY
4BG1-T
101402-7630  

101402-7631 
9 400 611 175 
8972278280 
INJECTION-PUMP ASSEMBLY
4BG1-T
 
 
INJECTION-PUMP ASSEMBLY
4BG1-T
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 400 613 198 
8972278281 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 611 814 
8972222350 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 613 977 
8972234270 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 611 245 
8972389770 
INJECTION-PUMP ASSEMBLY
4JG1-T
9 400 611 376 
8972389771 
INJECTION-PUMP ASSEMBLY
4JG1-T
9 400 611 983 
8972389772 
INJECTION-PUMP ASSEMBLY
4JG1-T
9 400 612 199 
8972389773 
INJECTION-PUMP ASSEMBLY
4JG1-T
9 400 611 377 
8972404401 
INJECTION-PUMP ASSEMBLY
4JG1-T
9 400 612 102 
8972404402 
INJECTION-PUMP ASSEMBLY
4JG1-T
9 400 612 518 
8972404403 
INJECTION-PUMP ASSEMBLY
4JG1-T
9 400 611 246 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 400 613 978 
8972393730 
INJECTION-PUMP ASSEMBLY
4BG1-T
9 400 611 739 
8972289990 
INJECTION-PUMP ASSEMBLY
4BG1-T
Back to top